Radford, United States
Server infrastructure for Utility Companies in Radford
The right server for Utility Companies is decided by the work it has to do, not by the size of the plan you happen to land on. For a small Utility Companies business in Radford that is about 2 Cores, 24 GB of memory and 150 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Radford. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small Utility Companies Most likely here
1–10 people · ~5,000 visits a month
$251.50 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 150 GB storage
About 2.2 requests a second at peak, holding roughly 19.6 GB of working data.
Configure this build →Medium Utility Companies
11–50 people · ~50,000 visits a month
$553.90 USD USD
per month · VDS
- 4 Cores
- 64 GB RAM
- 350 GB storage
- Managed
About 22.2 requests a second at peak, holding roughly 56 GB of working data.
Configure this build →Large Utility Companies
51+ people · ~500,000 visits a month
$2,234.65 USD USD
per month · Dedicated Server
- 16 Cores
- 256 GB RAM
- 1500 GB storage
- Managed
About 222.2 requests a second at peak, holding roughly 224 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why Utility Companies size up this way
Working from about 5,000 visits a month and roughly 21,333 requests a day, peaks run about 9× the average hour, so the build is sized for the busiest moment rather than the typical one; and about 20 GB of data needs to stay in memory to keep queries fast.
- 2.2 req/sec at peak
- 19.6 GB working set
- 4 GB/month growth
- Linux
Which tiers suit Utility Companies
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | An ERP or practice-management system needs a database tuned to its own workload, which a shared platform will not allow. |
| VPS Flexible virtual infrastructure with full root access | Workable | Enough for a small team, though the working set of a records system tends to outgrow a modest instance quickly. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed memory is what keeps the database in cache, which is the single biggest factor in how fast these systems feel. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The usual answer: a records system rewards a large, uncontended memory pool and consistent disk latency. |
| Bare Metal Physical compute for sustained, demanding workloads | Workable | For large deployments, or where the database and application tiers are virtualized onto one physical host. |
Utility Companies workloads you can host
An outage turns a quiet self-service portal into the busiest thing the company runs, without warning.
- Customer accounts & billing
- Field service dispatch
- Asset & network records
- Outage communications
- Regulatory submissions
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Radford is closest to Atlanta. Every marker costs the same per month.
Show all 24 locations and distances from Radford ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Atlanta, United States | 317 miles | 8–15 ms |
| New York, United States | 431 miles | 10–21 ms |
| Toronto, Canada | 455 miles | 11–22 ms |
| Chicago, United States | 499 miles | 12–24 ms |
| Miami, United States | 786 miles | 19–38 ms |
| Dallas, United States | 965 miles | 23–47 ms |
| Los Angeles, United States | 2,113 miles | 51–102 ms |
| Seattle, United States | 2,220 miles | 54–107 ms |
| Santa Clara, United States | 2,257 miles | 54–109 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 3,890 miles | 94–188 ms |
| Madrid, Spain | 4,011 miles | 97–194 ms |
| Amsterdam, The Netherlands | 4,070 miles | 98–197 ms |
| Frankfurt, Germany | 4,282 miles | 103–207 ms |
| Stockholm, Sweden | 4,335 miles | 105–209 ms |
| Milan, Italy | 4,447 miles | 107–215 ms |
| Bucharest, Romania | 5,181 miles | 125–250 ms |
| Tel Aviv, Israel | 6,094 miles | 147–294 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,784 miles | 164–328 ms |
| Delhi NCR, India | 7,680 miles | 185–371 ms |
| Mumbai, India | 8,186 miles | 198–395 ms |
| Hong Kong, China | 8,218 miles | 198–397 ms |
| Kolkata, India | 8,249 miles | 199–398 ms |
| Sydney, Australia | 9,551 miles | 231–461 ms |
| Singapore | 9,763 miles | 236–471 ms |
Distances are from Radford. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
Utility Companies in Radford
The closest of our 24 data centres to Radford is Atlanta, about 317 miles away. The price is the same in all 24 locations, so distance is the only variable worth optimising.
Radford has a population of about 17,403, which is why the small build above is the one most likely to fit a Utility Companies business here — though the other two are a click away if it does not. Local time is America/New York, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Radford
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Radford | Estimated round trip |
|---|---|---|
| Atlantaamericas | 317 miles | 8–15 ms |
| New Yorkamericas | 431 miles | 10–21 ms |
| Torontoamericas | 455 miles | 11–22 ms |
Radford sits in Virginia, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the small size assumed above, that is roughly 21,333 requests a day crossing that link.
Utility Companies hosting in Radford — FAQs
What size server does a Utility Companies business in Radford, VA need?
Where would the server for my Radford, VA business actually run?
Is a VPS enough for Utility Companies, or do we need a dedicated server?
Can you host customer accounts & billing for us?
Can we start smaller and grow?
Other industries in Radford
Same city, different workload.
Utility Companies hosting nearby
The same workload, in the nearest cities.