Kent, United States
Server infrastructure for Utility Companies in Kent
Sizing infrastructure for Utility Companies starts with the workload, then works back to cores, memory and disk. For a medium Utility Companies business in Kent that is about 4 Cores, 64 GB of memory and 350 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Kent. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small Utility Companies
1–10 people · ~5,000 visits a month
$251.50 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 150 GB storage
About 2.2 requests a second at peak, holding roughly 19.6 GB of working data.
Configure this build →Medium Utility Companies Most likely here
11–50 people · ~50,000 visits a month
$553.90 USD USD
per month · VDS
- 4 Cores
- 64 GB RAM
- 350 GB storage
- Managed
About 22.2 requests a second at peak, holding roughly 56 GB of working data.
Configure this build →Large Utility Companies
51+ people · ~500,000 visits a month
$2,234.65 USD USD
per month · Dedicated Server
- 16 Cores
- 256 GB RAM
- 1500 GB storage
- Managed
About 222.2 requests a second at peak, holding roughly 224 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why Utility Companies size up this way
Working from about 50,000 visits a month and roughly 213,333 requests a day, peaks run about 9× the average hour, so the build is sized for the busiest moment rather than the typical one; and about 56 GB of data needs to stay in memory to keep queries fast.
- 22.2 req/sec at peak
- 56 GB working set
- 12 GB/month growth
- Linux
Which tiers suit Utility Companies
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | An ERP or practice-management system needs a database tuned to its own workload, which a shared platform will not allow. |
| VPS Flexible virtual infrastructure with full root access | Workable | Enough for a small team, though the working set of a records system tends to outgrow a modest instance quickly. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed memory is what keeps the database in cache, which is the single biggest factor in how fast these systems feel. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The usual answer: a records system rewards a large, uncontended memory pool and consistent disk latency. |
| Bare Metal Physical compute for sustained, demanding workloads | Workable | For large deployments, or where the database and application tiers are virtualized onto one physical host. |
Utility Companies workloads you can host
An outage turns a quiet self-service portal into the busiest thing the company runs, without warning.
- Customer accounts & billing
- Field service dispatch
- Asset & network records
- Outage communications
- Regulatory submissions
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Kent has a data centre of its own. Every marker costs the same per month.
Show all 24 locations and distances from Kent ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Seattle, United States | Same city | 1–2 ms |
| Santa Clara, United States | 693 miles | 17–33 ms |
| Los Angeles, United States | 944 miles | 23–46 ms |
| Dallas, United States | 1,668 miles | 40–81 ms |
| Chicago, United States | 1,728 miles | 42–83 ms |
| Toronto, Canada | 2,064 miles | 50–100 ms |
| Atlanta, United States | 2,171 miles | 52–105 ms |
| New York, United States | 2,399 miles | 58–116 ms |
| Miami, United States | 2,722 miles | 66–131 ms |
| Europe, Middle East & Africa · 8 locations | ||
| Stockholm, Sweden | 4,730 miles | 114–228 ms |
| London, United Kingdom | 4,795 miles | 116–231 ms |
| Amsterdam, The Netherlands | 4,874 miles | 118–235 ms |
| Frankfurt, Germany | 5,094 miles | 123–246 ms |
| Madrid, Spain | 5,296 miles | 128–256 ms |
| Milan, Italy | 5,380 miles | 130–260 ms |
| Bucharest, Romania | 5,808 miles | 140–280 ms |
| Tel Aviv, Israel | 6,764 miles | 163–327 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 4,796 miles | 116–232 ms |
| Hong Kong, China | 6,484 miles | 157–313 ms |
| Delhi NCR, India | 7,051 miles | 170–340 ms |
| Kolkata, India | 7,242 miles | 175–350 ms |
| Sydney, Australia | 7,746 miles | 187–374 ms |
| Mumbai, India | 7,750 miles | 187–374 ms |
| Singapore | 8,077 miles | 195–390 ms |
Distances are from Kent. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
Utility Companies in Kent
The closest of our 24 data centres to Kent is Seattle, about 16 miles away. The price is the same in all 24 locations, so distance is the only variable worth optimising.
Kent has a population of about 126,952, which is why the medium build above is the one most likely to fit a Utility Companies business here — though the other two are a click away if it does not. Local time is America/Los Angeles, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Kent
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Kent | Estimated round trip |
|---|---|---|
| Seattleamericas | In your metro | 1–2 ms |
| Santa Claraamericas | 693 miles | 17–33 ms |
| Los Angelesamericas | 944 miles | 23–46 ms |
Kent sits in Washington, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 213,333 requests a day crossing that link.
Utility Companies hosting in Kent — FAQs
What size server does a Utility Companies business in Kent, WA need?
Where would the server for my Kent, WA business actually run?
Is a VPS enough for Utility Companies, or do we need a dedicated server?
Can you host customer accounts & billing for us?
Can we start smaller and grow?
Other industries in Kent
Same city, different workload.
Utility Companies hosting nearby
The same workload, in the nearest cities.