Selma, United States
Server infrastructure for SCADA Systems in Selma
Sizing infrastructure for SCADA Systems starts with the workload, then works back to cores, memory and disk. For a small SCADA Systems business in Selma that is about 2 Cores, 24 GB of memory and 600 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Selma. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small SCADA Systems Most likely here
1–10 people · ~5,000 visits a month
$309.55 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 600 GB storage
About 0.7 requests a second at peak, holding roughly 14 GB of working data.
Configure this build →Medium SCADA Systems
11–50 people · ~50,000 visits a month
$668.65 USD USD
per month · VDS
- 4 Cores
- 48 GB RAM
- 2000 GB storage
- Managed
About 7.4 requests a second at peak, holding roughly 40 GB of working data.
Configure this build →Large SCADA Systems
51+ people · ~500,000 visits a month
$2,140.15 USD USD
per month · Dedicated Server
- 16 Cores
- 196 GB RAM
- 4000 GB storage
- Managed
About 74.1 requests a second at peak, holding roughly 160 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why SCADA Systems size up this way
Working from about 5,000 visits a month and roughly 21,333 requests a day, storage grows by roughly 42 GB a month at this size, which usually decides the build before CPU does; about 14 GB of data needs to stay in memory to keep queries fast; and each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site.
- 0.7 req/sec at peak
- 14 GB working set
- 42 GB/month growth
- Linux
Which tiers suit SCADA Systems
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | An ERP or practice-management system needs a database tuned to its own workload, which a shared platform will not allow. |
| VPS Flexible virtual infrastructure with full root access | Workable | Enough for a small team, though the working set of a records system tends to outgrow a modest instance quickly. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed memory is what keeps the database in cache, which is the single biggest factor in how fast these systems feel. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The usual answer: a records system rewards a large, uncontended memory pool and consistent disk latency. |
| Bare Metal Physical compute for sustained, demanding workloads | Workable | For large deployments, or where the database and application tiers are virtualized onto one physical host. |
SCADA Systems workloads you can host
Alarms must be delivered in order and in real time; a late alarm is worse than no alarm.
- Telemetry ingestion
- Alarm management
- Trend historian
- Operator HMI
- Redundant polling
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Selma is closest to Santa Clara. Every marker costs the same per month.
Show all 24 locations and distances from Selma ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Santa Clara, United States | 140 miles | 3–7 ms |
| Los Angeles, United States | 190 miles | 5–9 ms |
| Seattle, United States | 775 miles | 19–37 ms |
| Dallas, United States | 1,319 miles | 32–64 ms |
| Chicago, United States | 1,740 miles | 42–84 ms |
| Atlanta, United States | 1,988 miles | 48–96 ms |
| Toronto, Canada | 2,159 miles | 52–104 ms |
| Miami, United States | 2,428 miles | 59–117 ms |
| New York, United States | 2,450 miles | 59–118 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 5,316 miles | 128–257 ms |
| Hong Kong, China | 7,067 miles | 171–341 ms |
| Sydney, Australia | 7,518 miles | 181–363 ms |
| Delhi NCR, India | 7,805 miles | 188–377 ms |
| Kolkata, India | 7,962 miles | 192–384 ms |
| Mumbai, India | 8,506 miles | 205–411 ms |
| Singapore | 8,615 miles | 208–416 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 5,339 miles | 129–258 ms |
| Stockholm, Sweden | 5,383 miles | 130–260 ms |
| Amsterdam, The Netherlands | 5,446 miles | 131–263 ms |
| Frankfurt, Germany | 5,670 miles | 137–274 ms |
| Madrid, Spain | 5,746 miles | 139–277 ms |
| Milan, Italy | 5,934 miles | 143–287 ms |
| Bucharest, Romania | 6,443 miles | 156–311 ms |
| Tel Aviv, Israel | 7,413 miles | 179–358 ms |
Distances are from Selma. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
SCADA Systems in Selma
The closest of our 24 data centres to Selma is Santa Clara, about 140 miles away. The price is the same in all 24 locations, so distance is the only variable worth optimising.
Selma has a population of about 24,414, which is why the small build above is the one most likely to fit a SCADA Systems business here — though the other two are a click away if it does not. Local time is America/Los Angeles, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Selma
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Selma | Estimated round trip |
|---|---|---|
| Santa Claraamericas | 140 miles | 3–7 ms |
| Los Angelesamericas | 190 miles | 5–9 ms |
| Seattleamericas | 775 miles | 19–37 ms |
Selma sits in California, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the small size assumed above, that is roughly 21,333 requests a day crossing that link.
SCADA Systems hosting in Selma — FAQs
What size server does a SCADA Systems business in Selma, CA need?
Where would the server for my Selma, CA business actually run?
Is a VPS enough for SCADA Systems, or do we need a dedicated server?
Can you host telemetry ingestion for us?
Can we start smaller and grow?
Other industries in Selma
Same city, different workload.