Portsmouth, United States
Server infrastructure for Industrial Automation in Portsmouth
Sizing infrastructure for Industrial Automation starts with the workload, then works back to cores, memory and disk. For a medium Industrial Automation business in Portsmouth that is about 4 Cores, 64 GB of memory and 1500 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Portsmouth. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small Industrial Automation
1–10 people · ~5,000 visits a month
$296.05 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 500 GB storage
About 0.6 requests a second at peak, holding roughly 16.8 GB of working data.
Configure this build →Medium Industrial Automation Most likely here
11–50 people · ~50,000 visits a month
$709.15 USD USD
per month · VDS
- 4 Cores
- 64 GB RAM
- 1500 GB storage
- Managed
About 6.2 requests a second at peak, holding roughly 48 GB of working data.
Configure this build →Large Industrial Automation
51+ people · ~500,000 visits a month
$2,572.15 USD USD
per month · Dedicated Server
- 16 Cores
- 256 GB RAM
- 4000 GB storage
- Managed
About 61.7 requests a second at peak, holding roughly 192 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why Industrial Automation size up this way
Working from about 50,000 visits a month and roughly 213,333 requests a day, storage grows by roughly 100 GB a month at this size, which usually decides the build before CPU does; about 48 GB of data needs to stay in memory to keep queries fast; and the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 6.2 req/sec at peak
- 48 GB working set
- 100 GB/month growth
- Windows
Which tiers suit Industrial Automation
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | An ERP or practice-management system needs a database tuned to its own workload, which a shared platform will not allow. |
| VPS Flexible virtual infrastructure with full root access | Workable | Enough for a small team, though the working set of a records system tends to outgrow a modest instance quickly. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed memory is what keeps the database in cache, which is the single biggest factor in how fast these systems feel. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The usual answer: a records system rewards a large, uncontended memory pool and consistent disk latency. |
| Bare Metal Physical compute for sustained, demanding workloads | Workable | For large deployments, or where the database and application tiers are virtualized onto one physical host. |
Industrial Automation workloads you can host
The historian records every tag continuously, which is a small write repeated forever.
- PLC programme repository
- HMI applications
- Historian database
- Remote diagnostics
- Simulation environments
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Portsmouth is closest to New York. Every marker costs the same per month.
Show all 24 locations and distances from Portsmouth ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| New York, United States | 295 miles | 7–14 ms |
| Toronto, Canada | 498 miles | 12–24 ms |
| Atlanta, United States | 503 miles | 12–24 ms |
| Chicago, United States | 698 miles | 17–34 ms |
| Miami, United States | 799 miles | 19–39 ms |
| Dallas, United States | 1,194 miles | 29–58 ms |
| Los Angeles, United States | 2,350 miles | 57–113 ms |
| Seattle, United States | 2,430 miles | 59–117 ms |
| Santa Clara, United States | 2,491 miles | 60–120 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 3,728 miles | 90–180 ms |
| Madrid, Spain | 3,813 miles | 92–184 ms |
| Amsterdam, The Netherlands | 3,915 miles | 95–189 ms |
| Frankfurt, Germany | 4,123 miles | 100–199 ms |
| Stockholm, Sweden | 4,216 miles | 102–204 ms |
| Milan, Italy | 4,275 miles | 103–206 ms |
| Bucharest, Romania | 5,025 miles | 121–243 ms |
| Tel Aviv, Israel | 5,923 miles | 143–286 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,922 miles | 167–334 ms |
| Delhi NCR, India | 7,608 miles | 184–367 ms |
| Mumbai, India | 8,082 miles | 195–390 ms |
| Kolkata, India | 8,212 miles | 198–396 ms |
| Hong Kong, China | 8,293 miles | 200–400 ms |
| Sydney, Australia | 9,779 miles | 236–472 ms |
| Singapore | 9,798 miles | 237–473 ms |
Distances are from Portsmouth. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
Industrial Automation in Portsmouth
The closest of our 24 data centres to Portsmouth is New York, about 295 miles away. Every kilometre between your users and the server is latency you cannot optimise away in software.
Portsmouth has a population of about 96,201, which is why the medium build above is the one most likely to fit a Industrial Automation business here — though the other two are a click away if it does not. Local time is America/New York, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Portsmouth
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Portsmouth | Estimated round trip |
|---|---|---|
| New Yorkamericas | 295 miles | 7–14 ms |
| Torontoamericas | 498 miles | 12–24 ms |
| Atlantaamericas | 503 miles | 12–24 ms |
Portsmouth sits in Virginia, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 213,333 requests a day crossing that link.
Industrial Automation hosting in Portsmouth — FAQs
What size server does a Industrial Automation business in Portsmouth, VA need?
Where would the server for my Portsmouth, VA business actually run?
Is a VPS enough for Industrial Automation, or do we need a dedicated server?
Can you host pLC programme repository for us?
Can we start smaller and grow?
Other industries in Portsmouth
Same city, different workload.
Industrial Automation hosting nearby
The same workload, in the nearest cities.