Mint Hill, United States
Server infrastructure for Industrial Automation in Mint Hill
Sizing infrastructure for Industrial Automation starts with the workload, then works back to cores, memory and disk. For a medium Industrial Automation business in Mint Hill that is about 4 Cores, 64 GB of memory and 1500 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Mint Hill. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small Industrial Automation
1–10 people · ~5,000 visits a month
$296.05 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 500 GB storage
About 0.6 requests a second at peak, holding roughly 16.8 GB of working data.
Configure this build →Medium Industrial Automation Most likely here
11–50 people · ~50,000 visits a month
$709.15 USD USD
per month · VDS
- 4 Cores
- 64 GB RAM
- 1500 GB storage
- Managed
About 6.2 requests a second at peak, holding roughly 48 GB of working data.
Configure this build →Large Industrial Automation
51+ people · ~500,000 visits a month
$2,572.15 USD USD
per month · Dedicated Server
- 16 Cores
- 256 GB RAM
- 4000 GB storage
- Managed
About 61.7 requests a second at peak, holding roughly 192 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why Industrial Automation size up this way
Working from about 50,000 visits a month and roughly 213,333 requests a day, storage grows by roughly 100 GB a month at this size, which usually decides the build before CPU does; about 48 GB of data needs to stay in memory to keep queries fast; and the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 6.2 req/sec at peak
- 48 GB working set
- 100 GB/month growth
- Windows
Which tiers suit Industrial Automation
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | An ERP or practice-management system needs a database tuned to its own workload, which a shared platform will not allow. |
| VPS Flexible virtual infrastructure with full root access | Workable | Enough for a small team, though the working set of a records system tends to outgrow a modest instance quickly. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed memory is what keeps the database in cache, which is the single biggest factor in how fast these systems feel. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The usual answer: a records system rewards a large, uncontended memory pool and consistent disk latency. |
| Bare Metal Physical compute for sustained, demanding workloads | Workable | For large deployments, or where the database and application tiers are virtualized onto one physical host. |
Industrial Automation workloads you can host
The historian records every tag continuously, which is a small write repeated forever.
- PLC programme repository
- HMI applications
- Historian database
- Remote diagnostics
- Simulation environments
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Mint Hill is closest to Atlanta. Every marker costs the same per month.
Show all 24 locations and distances from Mint Hill ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Atlanta, United States | 235 miles | 6–11 ms |
| New York, United States | 526 miles | 13–25 ms |
| Toronto, Canada | 589 miles | 14–28 ms |
| Chicago, United States | 597 miles | 14–29 ms |
| Miami, United States | 651 miles | 16–31 ms |
| Dallas, United States | 939 miles | 23–45 ms |
| Los Angeles, United States | 2,126 miles | 51–103 ms |
| Santa Clara, United States | 2,288 miles | 55–110 ms |
| Seattle, United States | 2,292 miles | 55–111 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 3,985 miles | 96–192 ms |
| Madrid, Spain | 4,081 miles | 99–197 ms |
| Amsterdam, The Netherlands | 4,168 miles | 101–201 ms |
| Frankfurt, Germany | 4,379 miles | 106–211 ms |
| Stockholm, Sweden | 4,448 miles | 107–215 ms |
| Milan, Italy | 4,536 miles | 109–219 ms |
| Bucharest, Romania | 5,279 miles | 127–255 ms |
| Tel Aviv, Israel | 6,184 miles | 149–299 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,896 miles | 166–333 ms |
| Delhi NCR, India | 7,808 miles | 188–377 ms |
| Mumbai, India | 8,306 miles | 201–401 ms |
| Hong Kong, China | 8,347 miles | 201–403 ms |
| Kolkata, India | 8,382 miles | 202–405 ms |
| Sydney, Australia | 9,518 miles | 230–460 ms |
| Singapore | 9,896 miles | 239–478 ms |
Distances are from Mint Hill. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
Industrial Automation in Mint Hill
The closest of our 24 data centres to Mint Hill is Atlanta, about 235 miles away. Every kilometre between your users and the server is latency you cannot optimise away in software.
Mint Hill has a population of about 25,627, which is why the medium build above is the one most likely to fit a Industrial Automation business here — though the other two are a click away if it does not. Local time is America/New York, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Mint Hill
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Mint Hill | Estimated round trip |
|---|---|---|
| Atlantaamericas | 235 miles | 6–11 ms |
| New Yorkamericas | 526 miles | 13–25 ms |
| Torontoamericas | 589 miles | 14–28 ms |
Mint Hill sits in North Carolina, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 213,333 requests a day crossing that link.
Industrial Automation hosting in Mint Hill — FAQs
What size server does a Industrial Automation business in Mint Hill, NC need?
Where would the server for my Mint Hill, NC business actually run?
Is a VPS enough for Industrial Automation, or do we need a dedicated server?
Can you host pLC programme repository for us?
Can we start smaller and grow?
Other industries in Mint Hill
Same city, different workload.
Industrial Automation hosting nearby
The same workload, in the nearest cities.