San Fernando, United States
Server infrastructure for GIS & Mapping in San Fernando
Most GIS & Mapping outgrow their first server in one specific place — and it is rarely the one the plan name suggests. For a small GIS & Mapping business in San Fernando that is about 2 Cores, 32 GB of memory and 800 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from San Fernando. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small GIS & Mapping Most likely here
1–10 people · ~5,000 visits a month
$408.10 USD USD
per month · VDS
- 2 Cores
- 32 GB RAM
- 800 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 28 GB of working data.
Configure this build →Medium GIS & Mapping
11–50 people · ~50,000 visits a month
$1,161.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 3000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 80 GB of working data.
Configure this build →Large GIS & Mapping
51+ people · ~500,000 visits a month
$3,567.10 USD USD
per month · Bare Metal
- 24 Cores
- 384 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 320 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why GIS & Mapping size up this way
Working from about 5,000 visits a month and roughly 2,667 requests a day, storage grows by roughly 53 GB a month at this size, which usually decides the build before CPU does; about 28 GB of data needs to stay in memory to keep queries fast; and each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site.
- 0.1 req/sec at peak
- 28 GB working set
- 53 GB/month growth
- Linux
Which tiers suit GIS & Mapping
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | There is no version of this workload that fits on shared hosting. |
| VPS Flexible virtual infrastructure with full root access | Workable | Useful for development, notebooks and light inference, but not for training or sustained compute. |
| VDS Virtual server with resources pinned to you alone | Workable | Suits CPU-bound preprocessing and data preparation with a guaranteed share of the machine. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | Production compute wants the whole machine, with memory bandwidth that is not being shared. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | Training, inference and simulation belong on physical hardware, with GPUs available on request. |
GIS & Mapping workloads you can host
Spatial queries and tile rendering are both CPU-hungry, and a cached basemap is what makes the map usable.
- Spatial database
- Tile rendering & caching
- Layer management
- Geoprocessing jobs
- Web map services
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
San Fernando has a data centre of its own. Every marker costs the same per month.
Show all 24 locations and distances from San Fernando ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Los Angeles, United States | Same city | 1–2 ms |
| Santa Clara, United States | 290 miles | 7–14 ms |
| Seattle, United States | 942 miles | 23–46 ms |
| Dallas, United States | 1,248 miles | 30–60 ms |
| Chicago, United States | 1,745 miles | 42–84 ms |
| Atlanta, United States | 1,941 miles | 47–94 ms |
| Toronto, Canada | 2,173 miles | 52–105 ms |
| Miami, United States | 2,348 miles | 57–113 ms |
| New York, United States | 2,449 miles | 59–118 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 5,434 miles | 131–262 ms |
| Stockholm, Sweden | 5,507 miles | 133–266 ms |
| Amsterdam, The Netherlands | 5,547 miles | 134–268 ms |
| Frankfurt, Germany | 5,773 miles | 139–279 ms |
| Madrid, Spain | 5,814 miles | 140–281 ms |
| Milan, Italy | 6,030 miles | 146–291 ms |
| Bucharest, Romania | 6,561 miles | 158–317 ms |
| Tel Aviv, Israel | 7,532 miles | 182–364 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 5,462 miles | 132–264 ms |
| Hong Kong, China | 7,220 miles | 174–349 ms |
| Sydney, Australia | 7,500 miles | 181–362 ms |
| Delhi NCR, India | 7,975 miles | 193–385 ms |
| Kolkata, India | 8,132 miles | 196–393 ms |
| Mumbai, India | 8,676 miles | 209–419 ms |
| Singapore | 8,756 miles | 211–423 ms |
Distances are from San Fernando. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
GIS & Mapping in San Fernando
The closest of our 24 data centres to San Fernando is Los Angeles, about 19 miles away. Choosing the closest data centre is the cheapest performance improvement available, and it costs nothing extra.
San Fernando has a population of about 24,931, which is why the small build above is the one most likely to fit a GIS & Mapping business here — though the other two are a click away if it does not. Local time is America/Los Angeles, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from San Fernando
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from San Fernando | Estimated round trip |
|---|---|---|
| Los Angelesamericas | In your metro | 1–2 ms |
| Santa Claraamericas | 290 miles | 7–14 ms |
| Seattleamericas | 942 miles | 23–46 ms |
San Fernando sits in California, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the small size assumed above, that is roughly 2,667 requests a day crossing that link.
GIS & Mapping hosting in San Fernando — FAQs
What size server does a GIS & Mapping business in San Fernando, CA need?
Where would the server for my San Fernando, CA business actually run?
Is a VPS enough for GIS & Mapping, or do we need a dedicated server?
Can you host spatial database for us?
Can we start smaller and grow?
Other industries in San Fernando
Same city, different workload.
GIS & Mapping hosting nearby
The same workload, in the nearest cities.