Rome, United States
Server infrastructure for BIM Services in Rome
Infrastructure for BIM Services is a question of matching the machine to the application, then putting it near the people using it. For a medium BIM Services business in Rome that is about 6 Cores, 96 GB of memory and 2000 GB of storage on Dedicated Server.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Rome. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small BIM Services
1–10 people · ~5,000 visits a month
$381.10 USD USD
per month · VDS
- 2 Cores
- 32 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 22.4 GB of working data.
Configure this build →Medium BIM Services Most likely here
11–50 people · ~50,000 visits a month
$1,026.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →Large BIM Services
51+ people · ~500,000 visits a month
$3,070.30 USD USD
per month · Bare Metal
- 20 Cores
- 320 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 256 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why BIM Services size up this way
Working from about 50,000 visits a month and roughly 26,667 requests a day, storage grows by roughly 120 GB a month at this size, which usually decides the build before CPU does; about 64 GB of data needs to stay in memory to keep queries fast; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; and the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 0.6 req/sec at peak
- 64 GB working set
- 120 GB/month growth
- Windows
Which tiers suit BIM Services
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
BIM Services workloads you can host
Clash detection on a federated model is a heavy, memory-hungry run that people wait on.
- Federated BIM models
- Clash detection runs
- Model coordination
- Revit/CAD workstations
- Common data environment
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Rome is closest to New York. Every marker costs the same per month.
Show all 24 locations and distances from Rome ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| New York, United States | 188 miles | 5–9 ms |
| Toronto, Canada | 199 miles | 5–10 ms |
| Chicago, United States | 626 miles | 15–30 ms |
| Atlanta, United States | 812 miles | 20–39 ms |
| Miami, United States | 1,235 miles | 30–60 ms |
| Dallas, United States | 1,362 miles | 33–66 ms |
| Seattle, United States | 2,259 miles | 55–109 ms |
| Los Angeles, United States | 2,367 miles | 57–114 ms |
| Santa Clara, United States | 2,452 miles | 59–118 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 3,413 miles | 82–165 ms |
| Madrid, Spain | 3,583 miles | 86–173 ms |
| Amsterdam, The Netherlands | 3,587 miles | 87–173 ms |
| Frankfurt, Germany | 3,802 miles | 92–184 ms |
| Stockholm, Sweden | 3,836 miles | 93–185 ms |
| Milan, Italy | 3,980 miles | 96–192 ms |
| Bucharest, Romania | 4,697 miles | 113–227 ms |
| Tel Aviv, Israel | 5,622 miles | 136–271 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,555 miles | 158–316 ms |
| Delhi NCR, India | 7,189 miles | 174–347 ms |
| Mumbai, India | 7,687 miles | 186–371 ms |
| Kolkata, India | 7,776 miles | 188–375 ms |
| Hong Kong, China | 7,868 miles | 190–380 ms |
| Singapore | 9,357 miles | 226–452 ms |
| Sydney, Australia | 9,869 miles | 238–476 ms |
Distances are from Rome. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
BIM Services in Rome
The closest of our 24 data centres to Rome is New York, about 188 miles away. Round-trip time is set by physical distance more than by anything else, so the nearest site is usually the right one.
Rome has a population of about 32,573, which is why the medium build above is the one most likely to fit a BIM Services business here — though the other two are a click away if it does not. Local time is America/New York, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Rome
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Rome | Estimated round trip |
|---|---|---|
| New Yorkamericas | 188 miles | 5–9 ms |
| Torontoamericas | 199 miles | 5–10 ms |
| Chicagoamericas | 626 miles | 15–30 ms |
Rome sits in New York, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 26,667 requests a day crossing that link.
BIM Services hosting in Rome — FAQs
What size server does a BIM Services business in Rome, NY need?
Where would the server for my Rome, NY business actually run?
Is a VPS enough for BIM Services, or do we need a dedicated server?
Can you host federated BIM models for us?
Can we start smaller and grow?
Other industries in Rome
Same city, different workload.