Repentigny, Canada
Server infrastructure for BIM Services in Repentigny
What BIM Services actually need from a server is predictable performance under load, and enough headroom to grow into. For a medium BIM Services business in Repentigny that is about 6 Cores, 96 GB of memory and 2000 GB of storage on Dedicated Server.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Repentigny. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small BIM Services
1–10 people · ~5,000 visits a month
$381.10 USD USD
per month · VDS
- 2 Cores
- 32 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 22.4 GB of working data.
Configure this build →Medium BIM Services Most likely here
11–50 people · ~50,000 visits a month
$1,026.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →Large BIM Services
51+ people · ~500,000 visits a month
$3,070.30 USD USD
per month · Bare Metal
- 20 Cores
- 320 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 256 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why BIM Services size up this way
Working from about 50,000 visits a month and roughly 26,667 requests a day, storage grows by roughly 120 GB a month at this size, which usually decides the build before CPU does; about 64 GB of data needs to stay in memory to keep queries fast; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; and the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 0.6 req/sec at peak
- 64 GB working set
- 120 GB/month growth
- Windows
Which tiers suit BIM Services
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
BIM Services workloads you can host
Clash detection on a federated model is a heavy, memory-hungry run that people wait on.
- Federated BIM models
- Clash detection runs
- Model coordination
- Revit/CAD workstations
- Common data environment
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Repentigny is closest to Toronto. Every marker costs the same per month.
Show all 24 locations and distances from Repentigny ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Toronto, Canada | 325 miles | 8–16 ms |
| New York, United States | 349 miles | 8–17 ms |
| Chicago, United States | 754 miles | 18–36 ms |
| Atlanta, United States | 1,010 miles | 24–49 ms |
| Miami, United States | 1,430 miles | 35–69 ms |
| Dallas, United States | 1,528 miles | 37–74 ms |
| Seattle, United States | 2,282 miles | 55–110 ms |
| Los Angeles, United States | 2,471 miles | 60–119 ms |
| Santa Clara, United States | 2,534 miles | 61–122 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 3,230 miles | 78–156 ms |
| Amsterdam, The Netherlands | 3,400 miles | 82–164 ms |
| Madrid, Spain | 3,426 miles | 83–165 ms |
| Frankfurt, Germany | 3,617 miles | 87–175 ms |
| Stockholm, Sweden | 3,638 miles | 88–176 ms |
| Milan, Italy | 3,802 miles | 92–184 ms |
| Bucharest, Romania | 4,508 miles | 109–218 ms |
| Tel Aviv, Israel | 5,440 miles | 131–263 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,445 miles | 156–311 ms |
| Delhi NCR, India | 6,988 miles | 169–337 ms |
| Mumbai, India | 7,486 miles | 181–361 ms |
| Kolkata, India | 7,580 miles | 183–366 ms |
| Hong Kong, China | 7,710 miles | 186–372 ms |
| Singapore | 9,179 miles | 222–443 ms |
| Sydney, Australia | 9,965 miles | 241–481 ms |
Distances are from Repentigny. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
BIM Services in Repentigny
The closest of our 24 data centres to Repentigny is Toronto, about 325 miles away. Round-trip time is set by physical distance more than by anything else, so the nearest site is usually the right one.
Repentigny has a population of about 84,965, which is why the medium build above is the one most likely to fit a BIM Services business here — though the other two are a click away if it does not. Local time is America/Toronto, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to PIPEDA. Pricing is quoted in CAD, and the figure is the same wherever the machine physically sits.
Network reach from Repentigny
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Repentigny | Estimated round trip |
|---|---|---|
| Torontoamericas | 325 miles | 8–16 ms |
| New Yorkamericas | 349 miles | 8–17 ms |
| Chicagoamericas | 754 miles | 18–36 ms |
Repentigny sits in Quebec, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 26,667 requests a day crossing that link.
BIM Services hosting in Repentigny — FAQs
What size server does a BIM Services business in Repentigny, QC need?
Where would the server for my Repentigny, QC business actually run?
Is a VPS enough for BIM Services, or do we need a dedicated server?
Can you host federated BIM models for us?
Can we start smaller and grow?
Other industries in Repentigny
Same city, different workload.
BIM Services hosting nearby
The same workload, in the nearest cities.