Parkland, United States
Server infrastructure for BIM Services in Parkland
What BIM Services actually need from a server is predictable performance under load, and enough headroom to grow into. For a medium BIM Services business in Parkland that is about 6 Cores, 96 GB of memory and 2000 GB of storage on Dedicated Server.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Parkland. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small BIM Services
1–10 people · ~5,000 visits a month
$381.10 USD USD
per month · VDS
- 2 Cores
- 32 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 22.4 GB of working data.
Configure this build →Medium BIM Services Most likely here
11–50 people · ~50,000 visits a month
$1,026.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →Large BIM Services
51+ people · ~500,000 visits a month
$3,070.30 USD USD
per month · Bare Metal
- 20 Cores
- 320 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 256 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why BIM Services size up this way
Working from about 50,000 visits a month and roughly 26,667 requests a day, storage grows by roughly 120 GB a month at this size, which usually decides the build before CPU does; about 64 GB of data needs to stay in memory to keep queries fast; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; and the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 0.6 req/sec at peak
- 64 GB working set
- 120 GB/month growth
- Windows
Which tiers suit BIM Services
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
BIM Services workloads you can host
Clash detection on a federated model is a heavy, memory-hungry run that people wait on.
- Federated BIM models
- Clash detection runs
- Model coordination
- Revit/CAD workstations
- Common data environment
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Parkland is closest to Seattle. Every marker costs the same per month.
Show all 24 locations and distances from Parkland ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Seattle, United States | 32 miles | 1–2 ms |
| Santa Clara, United States | 678 miles | 16–33 ms |
| Los Angeles, United States | 931 miles | 22–45 ms |
| Dallas, United States | 1,669 miles | 40–81 ms |
| Chicago, United States | 1,738 miles | 42–84 ms |
| Toronto, Canada | 2,076 miles | 50–100 ms |
| Atlanta, United States | 2,177 miles | 53–105 ms |
| New York, United States | 2,411 miles | 58–116 ms |
| Miami, United States | 2,727 miles | 66–132 ms |
| Europe, Middle East & Africa · 8 locations | ||
| Stockholm, Sweden | 4,748 miles | 115–229 ms |
| London, United Kingdom | 4,813 miles | 116–232 ms |
| Amsterdam, The Netherlands | 4,892 miles | 118–236 ms |
| Frankfurt, Germany | 5,112 miles | 123–247 ms |
| Madrid, Spain | 5,314 miles | 128–257 ms |
| Milan, Italy | 5,398 miles | 130–261 ms |
| Bucharest, Romania | 5,826 miles | 141–281 ms |
| Tel Aviv, Israel | 6,781 miles | 164–327 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 4,796 miles | 116–232 ms |
| Hong Kong, China | 6,487 miles | 157–313 ms |
| Delhi NCR, India | 7,063 miles | 171–341 ms |
| Kolkata, India | 7,251 miles | 175–350 ms |
| Sydney, Australia | 7,730 miles | 187–373 ms |
| Mumbai, India | 7,762 miles | 187–375 ms |
| Singapore | 8,079 miles | 195–390 ms |
Distances are from Parkland. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
BIM Services in Parkland
Construction is one of the sectors Parkland is known for, so this is a workload we are asked about here more than most.
The closest of our 24 data centres to Parkland is Seattle, about 32 miles away. Choosing the closest data centre is the cheapest performance improvement available, and it costs nothing extra.
Parkland has a population of about 35,803, which is why the medium build above is the one most likely to fit a BIM Services business here — though the other two are a click away if it does not. Local time is America/Los Angeles, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Parkland
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Parkland | Estimated round trip |
|---|---|---|
| Seattleamericas | 32 miles | 1–2 ms |
| Santa Claraamericas | 678 miles | 16–33 ms |
| Los Angelesamericas | 931 miles | 22–45 ms |
Parkland sits in Washington, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 26,667 requests a day crossing that link.
BIM Services hosting in Parkland — FAQs
What size server does a BIM Services business in Parkland, WA need?
Where would the server for my Parkland, WA business actually run?
Is a VPS enough for BIM Services, or do we need a dedicated server?
Can you host federated BIM models for us?
Can we start smaller and grow?
Other industries in Parkland
Same city, different workload.
BIM Services hosting nearby
The same workload, in the nearest cities.