Oregon, United States
Server infrastructure for BIM Services in Oregon
There is no single correct server for BIM Services; there is a correct one for the workload, the volume and the budget. For a small BIM Services business in Oregon that is about 2 Cores, 32 GB of memory and 600 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Oregon. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small BIM Services Most likely here
1–10 people · ~5,000 visits a month
$381.10 USD USD
per month · VDS
- 2 Cores
- 32 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 22.4 GB of working data.
Configure this build →Medium BIM Services
11–50 people · ~50,000 visits a month
$1,026.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →Large BIM Services
51+ people · ~500,000 visits a month
$3,070.30 USD USD
per month · Bare Metal
- 20 Cores
- 320 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 256 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why BIM Services size up this way
Working from about 5,000 visits a month and roughly 2,667 requests a day, storage grows by roughly 42 GB a month at this size, which usually decides the build before CPU does; about 22 GB of data needs to stay in memory to keep queries fast; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; and the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 0.1 req/sec at peak
- 22.4 GB working set
- 42 GB/month growth
- Windows
Which tiers suit BIM Services
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
BIM Services workloads you can host
Clash detection on a federated model is a heavy, memory-hungry run that people wait on.
- Federated BIM models
- Clash detection runs
- Model coordination
- Revit/CAD workstations
- Common data environment
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Oregon is closest to Seattle. Every marker costs the same per month.
Show all 24 locations and distances from Oregon ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Seattle, United States | 200 miles | 5–10 ms |
| Santa Clara, United States | 510 miles | 12–25 ms |
| Los Angeles, United States | 772 miles | 19–37 ms |
| Dallas, United States | 1,605 miles | 39–78 ms |
| Chicago, United States | 1,755 miles | 42–85 ms |
| Toronto, Canada | 2,116 miles | 51–102 ms |
| Atlanta, United States | 2,156 miles | 52–104 ms |
| New York, United States | 2,445 miles | 59–118 ms |
| Miami, United States | 2,686 miles | 65–130 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 4,877 miles | 118–235 ms |
| Hong Kong, China | 6,588 miles | 159–318 ms |
| Delhi NCR, India | 7,221 miles | 174–349 ms |
| Kolkata, India | 7,394 miles | 179–357 ms |
| Sydney, Australia | 7,647 miles | 185–369 ms |
| Mumbai, India | 7,923 miles | 191–383 ms |
| Singapore | 8,170 miles | 197–394 ms |
| Europe, Middle East & Africa · 8 locations | ||
| Stockholm, Sweden | 4,909 miles | 118–237 ms |
| London, United Kingdom | 4,957 miles | 120–239 ms |
| Amsterdam, The Netherlands | 5,041 miles | 122–243 ms |
| Frankfurt, Germany | 5,262 miles | 127–254 ms |
| Madrid, Spain | 5,442 miles | 131–263 ms |
| Milan, Italy | 5,544 miles | 134–268 ms |
| Bucharest, Romania | 5,985 miles | 144–289 ms |
| Tel Aviv, Israel | 6,943 miles | 168–335 ms |
Distances are from Oregon. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
BIM Services in Oregon
The closest of our 24 data centres to Oregon is Seattle, about 200 miles away. Round-trip time is set by physical distance more than by anything else, so the nearest site is usually the right one.
Oregon has a population of about 1,187, which is why the small build above is the one most likely to fit a BIM Services business here — though the other two are a click away if it does not. Local time is America/Los Angeles, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Oregon
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Oregon | Estimated round trip |
|---|---|---|
| Seattleamericas | 200 miles | 5–10 ms |
| Santa Claraamericas | 510 miles | 12–25 ms |
| Los Angelesamericas | 772 miles | 19–37 ms |
every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the small size assumed above, that is roughly 2,667 requests a day crossing that link.
BIM Services hosting in Oregon — FAQs
What size server does a BIM Services business in Oregon need?
Where would the server for my Oregon business actually run?
Is a VPS enough for BIM Services, or do we need a dedicated server?
Can you host federated BIM models for us?
Can we start smaller and grow?
Other industries in Oregon
Same city, different workload.
BIM Services hosting nearby
The same workload, in the nearest cities.