Lents, United States
Server infrastructure for BIM Services in Lents
What BIM Services actually need from a server is predictable performance under load, and enough headroom to grow into. For a small BIM Services business in Lents that is about 2 Cores, 32 GB of memory and 600 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Lents. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small BIM Services Most likely here
1–10 people · ~5,000 visits a month
$381.10 USD USD
per month · VDS
- 2 Cores
- 32 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 22.4 GB of working data.
Configure this build →Medium BIM Services
11–50 people · ~50,000 visits a month
$1,026.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →Large BIM Services
51+ people · ~500,000 visits a month
$3,070.30 USD USD
per month · Bare Metal
- 20 Cores
- 320 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 256 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why BIM Services size up this way
Working from about 5,000 visits a month and roughly 2,667 requests a day, storage grows by roughly 42 GB a month at this size, which usually decides the build before CPU does; about 22 GB of data needs to stay in memory to keep queries fast; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; and the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 0.1 req/sec at peak
- 22.4 GB working set
- 42 GB/month growth
- Windows
Which tiers suit BIM Services
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
BIM Services workloads you can host
Clash detection on a federated model is a heavy, memory-hungry run that people wait on.
- Federated BIM models
- Clash detection runs
- Model coordination
- Revit/CAD workstations
- Common data environment
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Lents is closest to Seattle. Every marker costs the same per month.
Show all 24 locations and distances from Lents ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Seattle, United States | 147 miles | 4–7 ms |
| Santa Clara, United States | 562 miles | 14–27 ms |
| Los Angeles, United States | 822 miles | 20–40 ms |
| Dallas, United States | 1,625 miles | 39–78 ms |
| Chicago, United States | 1,749 miles | 42–84 ms |
| Toronto, Canada | 2,104 miles | 51–102 ms |
| Atlanta, United States | 2,163 miles | 52–104 ms |
| New York, United States | 2,434 miles | 59–118 ms |
| Miami, United States | 2,699 miles | 65–130 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 4,851 miles | 117–234 ms |
| Hong Kong, China | 6,555 miles | 158–316 ms |
| Delhi NCR, India | 7,171 miles | 173–346 ms |
| Kolkata, India | 7,349 miles | 177–355 ms |
| Sydney, Australia | 7,672 miles | 185–370 ms |
| Mumbai, India | 7,872 miles | 190–380 ms |
| Singapore | 8,141 miles | 197–393 ms |
| Europe, Middle East & Africa · 8 locations | ||
| Stockholm, Sweden | 4,859 miles | 117–235 ms |
| London, United Kingdom | 4,912 miles | 119–237 ms |
| Amsterdam, The Netherlands | 4,995 miles | 121–241 ms |
| Frankfurt, Germany | 5,216 miles | 126–252 ms |
| Madrid, Spain | 5,403 miles | 130–261 ms |
| Milan, Italy | 5,499 miles | 133–265 ms |
| Bucharest, Romania | 5,936 miles | 143–287 ms |
| Tel Aviv, Israel | 6,893 miles | 166–333 ms |
Distances are from Lents. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
BIM Services in Lents
The closest of our 24 data centres to Lents is Seattle, about 147 miles away. Round-trip time is set by physical distance more than by anything else, so the nearest site is usually the right one.
Lents has a population of about 20,156, which is why the small build above is the one most likely to fit a BIM Services business here — though the other two are a click away if it does not. Local time is America/Los Angeles, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Lents
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Lents | Estimated round trip |
|---|---|---|
| Seattleamericas | 147 miles | 4–7 ms |
| Santa Claraamericas | 562 miles | 14–27 ms |
| Los Angelesamericas | 822 miles | 20–40 ms |
Lents sits in Oregon, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the small size assumed above, that is roughly 2,667 requests a day crossing that link.
BIM Services hosting in Lents — FAQs
What size server does a BIM Services business in Lents, OR need?
Where would the server for my Lents, OR business actually run?
Is a VPS enough for BIM Services, or do we need a dedicated server?
Can you host federated BIM models for us?
Can we start smaller and grow?
Other industries in Lents
Same city, different workload.
BIM Services hosting nearby
The same workload, in the nearest cities.