Harlem, United States
Server infrastructure for BIM Services in Harlem
What BIM Services actually need from a server is predictable performance under load, and enough headroom to grow into. For a medium BIM Services business in Harlem that is about 6 Cores, 96 GB of memory and 2000 GB of storage on Dedicated Server.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Harlem. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small BIM Services
1–10 people · ~5,000 visits a month
$381.10 USD USD
per month · VDS
- 2 Cores
- 32 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 22.4 GB of working data.
Configure this build →Medium BIM Services Most likely here
11–50 people · ~50,000 visits a month
$1,026.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →Large BIM Services
51+ people · ~500,000 visits a month
$3,070.30 USD USD
per month · Bare Metal
- 20 Cores
- 320 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 256 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why BIM Services size up this way
Working from about 50,000 visits a month and roughly 26,667 requests a day, storage grows by roughly 120 GB a month at this size, which usually decides the build before CPU does; about 64 GB of data needs to stay in memory to keep queries fast; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; and the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 0.6 req/sec at peak
- 64 GB working set
- 120 GB/month growth
- Windows
Which tiers suit BIM Services
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
BIM Services workloads you can host
Clash detection on a federated model is a heavy, memory-hungry run that people wait on.
- Federated BIM models
- Clash detection runs
- Model coordination
- Revit/CAD workstations
- Common data environment
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Harlem has a data centre of its own. Every marker costs the same per month.
Show all 24 locations and distances from Harlem ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| New York, United States | Same city | 1–2 ms |
| Toronto, Canada | 341 miles | 8–16 ms |
| Chicago, United States | 713 miles | 17–34 ms |
| Atlanta, United States | 752 miles | 18–36 ms |
| Miami, United States | 1,100 miles | 27–53 ms |
| Dallas, United States | 1,375 miles | 33–66 ms |
| Seattle, United States | 2,402 miles | 58–116 ms |
| Los Angeles, United States | 2,448 miles | 59–118 ms |
| Santa Clara, United States | 2,554 miles | 62–123 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 3,455 miles | 83–167 ms |
| Madrid, Spain | 3,578 miles | 86–173 ms |
| Amsterdam, The Netherlands | 3,637 miles | 88–176 ms |
| Frankfurt, Germany | 3,848 miles | 93–186 ms |
| Stockholm, Sweden | 3,920 miles | 95–189 ms |
| Milan, Italy | 4,010 miles | 97–194 ms |
| Bucharest, Romania | 4,747 miles | 115–229 ms |
| Tel Aviv, Israel | 5,657 miles | 137–273 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,739 miles | 163–325 ms |
| Delhi NCR, India | 7,306 miles | 176–353 ms |
| Mumbai, India | 7,784 miles | 188–376 ms |
| Kolkata, India | 7,913 miles | 191–382 ms |
| Hong Kong, China | 8,044 miles | 194–388 ms |
| Singapore | 9,520 miles | 230–460 ms |
| Sydney, Australia | 9,939 miles | 240–480 ms |
Distances are from Harlem. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
BIM Services in Harlem
The closest of our 24 data centres to Harlem is New York, about 7 miles away. Every kilometre between your users and the server is latency you cannot optimise away in software.
Harlem has a population of about 116,345, which is why the medium build above is the one most likely to fit a BIM Services business here — though the other two are a click away if it does not. Local time is America/New York, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Harlem
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Harlem | Estimated round trip |
|---|---|---|
| New Yorkamericas | In your metro | 1–2 ms |
| Torontoamericas | 341 miles | 8–16 ms |
| Chicagoamericas | 713 miles | 17–34 ms |
Harlem sits in New York, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 26,667 requests a day crossing that link.
BIM Services hosting in Harlem — FAQs
What size server does a BIM Services business in Harlem, NY need?
Where would the server for my Harlem, NY business actually run?
Is a VPS enough for BIM Services, or do we need a dedicated server?
Can you host federated BIM models for us?
Can we start smaller and grow?
Other industries in Harlem
Same city, different workload.
BIM Services hosting nearby
The same workload, in the nearest cities.