Charlestown, United States
Server infrastructure for BIM Services in Charlestown
There is no single correct server for BIM Services; there is a correct one for the workload, the volume and the budget. For a small BIM Services business in Charlestown that is about 2 Cores, 32 GB of memory and 600 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Charlestown. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small BIM Services Most likely here
1–10 people · ~5,000 visits a month
$381.10 USD USD
per month · VDS
- 2 Cores
- 32 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 22.4 GB of working data.
Configure this build →Medium BIM Services
11–50 people · ~50,000 visits a month
$1,026.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →Large BIM Services
51+ people · ~500,000 visits a month
$3,070.30 USD USD
per month · Bare Metal
- 20 Cores
- 320 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 256 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why BIM Services size up this way
Working from about 5,000 visits a month and roughly 2,667 requests a day, storage grows by roughly 42 GB a month at this size, which usually decides the build before CPU does; about 22 GB of data needs to stay in memory to keep queries fast; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; and the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 0.1 req/sec at peak
- 22.4 GB working set
- 42 GB/month growth
- Windows
Which tiers suit BIM Services
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
BIM Services workloads you can host
Clash detection on a federated model is a heavy, memory-hungry run that people wait on.
- Federated BIM models
- Clash detection runs
- Model coordination
- Revit/CAD workstations
- Common data environment
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Charlestown is closest to New York. Every marker costs the same per month.
Show all 24 locations and distances from Charlestown ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| New York, United States | 191 miles | 5–9 ms |
| Toronto, Canada | 429 miles | 10–21 ms |
| Chicago, United States | 848 miles | 20–41 ms |
| Atlanta, United States | 937 miles | 23–45 ms |
| Miami, United States | 1,260 miles | 30–61 ms |
| Dallas, United States | 1,549 miles | 37–75 ms |
| Seattle, United States | 2,485 miles | 60–120 ms |
| Los Angeles, United States | 2,591 miles | 63–125 ms |
| Santa Clara, United States | 2,681 miles | 65–129 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 3,270 miles | 79–158 ms |
| Madrid, Spain | 3,399 miles | 82–164 ms |
| Amsterdam, The Netherlands | 3,453 miles | 83–167 ms |
| Frankfurt, Germany | 3,663 miles | 88–177 ms |
| Stockholm, Sweden | 3,742 miles | 90–181 ms |
| Milan, Italy | 3,826 miles | 92–185 ms |
| Bucharest, Romania | 4,563 miles | 110–220 ms |
| Tel Aviv, Israel | 5,473 miles | 132–264 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,706 miles | 162–324 ms |
| Delhi NCR, India | 7,142 miles | 172–345 ms |
| Mumbai, India | 7,609 miles | 184–367 ms |
| Kolkata, India | 7,761 miles | 187–375 ms |
| Hong Kong, China | 7,954 miles | 192–384 ms |
| Singapore | 9,399 miles | 227–454 ms |
| Sydney, Australia | 10,091 miles | 244–487 ms |
Distances are from Charlestown. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
BIM Services in Charlestown
The closest of our 24 data centres to Charlestown is New York, about 191 miles away. Every kilometre between your users and the server is latency you cannot optimise away in software.
Charlestown has a population of about 20,397, which is why the small build above is the one most likely to fit a BIM Services business here — though the other two are a click away if it does not. Local time is America/New York, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Charlestown
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Charlestown | Estimated round trip |
|---|---|---|
| New Yorkamericas | 191 miles | 5–9 ms |
| Torontoamericas | 429 miles | 10–21 ms |
| Chicagoamericas | 848 miles | 20–41 ms |
Charlestown sits in Massachusetts, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the small size assumed above, that is roughly 2,667 requests a day crossing that link.
BIM Services hosting in Charlestown — FAQs
What size server does a BIM Services business in Charlestown, MA need?
Where would the server for my Charlestown, MA business actually run?
Is a VPS enough for BIM Services, or do we need a dedicated server?
Can you host federated BIM models for us?
Can we start smaller and grow?
Other industries in Charlestown
Same city, different workload.
BIM Services hosting nearby
The same workload, in the nearest cities.