Bryan, United States
Server infrastructure for BIM Services in Bryan
There is no single correct server for BIM Services; there is a correct one for the workload, the volume and the budget. For a medium BIM Services business in Bryan that is about 6 Cores, 96 GB of memory and 2000 GB of storage on Dedicated Server.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Bryan. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small BIM Services
1–10 people · ~5,000 visits a month
$381.10 USD USD
per month · VDS
- 2 Cores
- 32 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 22.4 GB of working data.
Configure this build →Medium BIM Services Most likely here
11–50 people · ~50,000 visits a month
$1,026.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →Large BIM Services
51+ people · ~500,000 visits a month
$3,070.30 USD USD
per month · Bare Metal
- 20 Cores
- 320 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 256 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why BIM Services size up this way
Working from about 50,000 visits a month and roughly 26,667 requests a day, storage grows by roughly 120 GB a month at this size, which usually decides the build before CPU does; about 64 GB of data needs to stay in memory to keep queries fast; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; and the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 0.6 req/sec at peak
- 64 GB working set
- 120 GB/month growth
- Windows
Which tiers suit BIM Services
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
BIM Services workloads you can host
Clash detection on a federated model is a heavy, memory-hungry run that people wait on.
- Federated BIM models
- Clash detection runs
- Model coordination
- Revit/CAD workstations
- Common data environment
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Bryan is closest to Dallas. Every marker costs the same per month.
Show all 24 locations and distances from Bryan ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Dallas, United States | 147 miles | 4–7 ms |
| Atlanta, United States | 731 miles | 18–35 ms |
| Chicago, United States | 913 miles | 22–44 ms |
| Miami, United States | 1,041 miles | 25–50 ms |
| Toronto, Canada | 1,291 miles | 31–62 ms |
| Los Angeles, United States | 1,295 miles | 31–63 ms |
| New York, United States | 1,428 miles | 34–69 ms |
| Santa Clara, United States | 1,531 miles | 37–74 ms |
| Seattle, United States | 1,802 miles | 44–87 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 4,840 miles | 117–234 ms |
| Amsterdam, The Netherlands | 5,007 miles | 121–242 ms |
| Madrid, Spain | 5,011 miles | 121–242 ms |
| Stockholm, Sweden | 5,188 miles | 125–250 ms |
| Frankfurt, Germany | 5,225 miles | 126–252 ms |
| Milan, Italy | 5,414 miles | 131–261 ms |
| Bucharest, Romania | 6,110 miles | 148–295 ms |
| Tel Aviv, Israel | 7,050 miles | 170–340 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,587 miles | 159–318 ms |
| Hong Kong, China | 8,253 miles | 199–398 ms |
| Delhi NCR, India | 8,325 miles | 201–402 ms |
| Sydney, Australia | 8,556 miles | 207–413 ms |
| Kolkata, India | 8,744 miles | 211–422 ms |
| Mumbai, India | 8,926 miles | 215–431 ms |
| Singapore | 9,856 miles | 238–476 ms |
Distances are from Bryan. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
BIM Services in Bryan
The closest of our 24 data centres to Bryan is Dallas, about 147 miles away. Round-trip time is set by physical distance more than by anything else, so the nearest site is usually the right one.
Bryan has a population of about 82,118, which is why the medium build above is the one most likely to fit a BIM Services business here — though the other two are a click away if it does not. Local time is America/Chicago, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Bryan
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Bryan | Estimated round trip |
|---|---|---|
| Dallasamericas | 147 miles | 4–7 ms |
| Atlantaamericas | 731 miles | 18–35 ms |
| Chicagoamericas | 913 miles | 22–44 ms |
Bryan sits in Texas, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 26,667 requests a day crossing that link.
BIM Services hosting in Bryan — FAQs
What size server does a BIM Services business in Bryan, TX need?
Where would the server for my Bryan, TX business actually run?
Is a VPS enough for BIM Services, or do we need a dedicated server?
Can you host federated BIM models for us?
Can we start smaller and grow?
Other industries in Bryan
Same city, different workload.
BIM Services hosting nearby
The same workload, in the nearest cities.