Washington, United States
Server infrastructure for Architecture, CAD & Engineering Firms in Washington
Infrastructure for Architecture, CAD & Engineering Firms is a question of matching the machine to the application, then putting it near the people using it. For a small Architecture, CAD & Engineering business in Washington that is about 2 Cores, 10 GB of memory and 200 GB of storage on VPS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Washington. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small Architecture, CAD & Engineering Most likely here
1–10 people · ~5,000 visits a month
$137.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 200 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium Architecture, CAD & Engineering
11–50 people · ~50,000 visits a month
$289.30 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 450 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large Architecture, CAD & Engineering
51+ people · ~500,000 visits a month
$1,026.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why Architecture, CAD & Engineering Firms size up this way
Working from about 5,000 visits a month and roughly 2,667 requests a day, the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 0.1 req/sec at peak
- 5.6 GB working set
- 11 GB/month growth
- Windows
Which tiers suit Architecture, CAD & Engineering Firms
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
Architecture, CAD & Engineering Firms workloads you can host
- Remote workstations
- CAD & BIM models
- Rendering
- Project file storage
- Design collaboration
- Plot & print services
Architecture, CAD & Engineering in Washington, business by business
These are not the same workload. Sized at the small band, here is what each one actually needs.
| Business | Build | Tier | What decides it |
|---|---|---|---|
| Architecture Firms | 2 vCPU · 10 GB · 450 GB | VPS | A remote workstation is only useful if it feels local — this is where pinned resources stop being a nicety. |
| Engineering Design | 2 vCPU · 32 GB · 400 GB | VDS | FEA runs hold the entire mesh in memory, so RAM decides whether a model solves at all. |
| CAD Services | 2 vCPU · 10 GB · 300 GB | VPS | Bureau work means many client files in many formats, and translation is the CPU cost of accepting all of them. |
| 3D Design | 2 vCPU · 10 GB · 600 GB | VPS | Rendering is where the hours go, and a GPU changes the working day rather than the benchmark. |
| Product Design | 2 vCPU · 10 GB · 300 GB | VPS | Revisions matter more than volume: making the wrong version is a tooling cost, not a reprint. |
| Surveying | 2 vCPU · 32 GB · 1500 GB | VDS | A single scan is a point cloud of hundreds of millions of points, and the client wants it years later. |
| GIS & Mapping | 2 vCPU · 32 GB · 800 GB | VDS | Spatial queries and tile rendering are both CPU-hungry, and a cached basemap is what makes the map usable. |
| Drone Mapping | 2 vCPU · 32 GB · 1500 GB | VDS | Photogrammetry turns a thousand photographs into one model over many GPU-hours per flight. |
| Graphic Design | 2 vCPU · 10 GB · 350 GB | VPS | Layered source files are far larger than anything the client ever sees, and every round is kept. |
| UI/UX Design | 1 vCPU · 3 GB · 250 GB | Shared Hosting | Session recordings from user testing are video, and they accumulate faster than the design files do. |
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Washington is closest to Seattle. Every marker costs the same per month.
Show all 24 locations and distances from Washington ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Seattle, United States | 31 miles | 1–2 ms |
| Santa Clara, United States | 687 miles | 17–33 ms |
| Los Angeles, United States | 935 miles | 23–45 ms |
| Dallas, United States | 1,650 miles | 40–80 ms |
| Chicago, United States | 1,710 miles | 41–83 ms |
| Toronto, Canada | 2,047 miles | 49–99 ms |
| Atlanta, United States | 2,152 miles | 52–104 ms |
| New York, United States | 2,382 miles | 58–115 ms |
| Miami, United States | 2,704 miles | 65–131 ms |
| Europe, Middle East & Africa · 8 locations | ||
| Stockholm, Sweden | 4,729 miles | 114–228 ms |
| London, United Kingdom | 4,789 miles | 116–231 ms |
| Amsterdam, The Netherlands | 4,869 miles | 118–235 ms |
| Frankfurt, Germany | 5,090 miles | 123–246 ms |
| Madrid, Spain | 5,288 miles | 128–255 ms |
| Milan, Italy | 5,374 miles | 130–259 ms |
| Bucharest, Romania | 5,806 miles | 140–280 ms |
| Tel Aviv, Israel | 6,763 miles | 163–327 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 4,815 miles | 116–232 ms |
| Hong Kong, China | 6,502 miles | 157–314 ms |
| Delhi NCR, India | 7,062 miles | 170–341 ms |
| Kolkata, India | 7,256 miles | 175–350 ms |
| Sydney, Australia | 7,760 miles | 187–375 ms |
| Mumbai, India | 7,760 miles | 187–375 ms |
| Singapore | 8,095 miles | 195–391 ms |
Distances are from Washington. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
Architecture, CAD & Engineering Firms in Washington
The closest of our 24 data centres to Washington is Seattle, about 31 miles away. Round-trip time is set by physical distance more than by anything else, so the nearest site is usually the right one.
Washington has a population of about 1,101, which is why the small build above is the one most likely to fit a Architecture, CAD & Engineering business here — though the other two are a click away if it does not. Local time is America/Los Angeles, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Washington
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Washington | Estimated round trip |
|---|---|---|
| Seattleamericas | 31 miles | 1–2 ms |
| Santa Claraamericas | 687 miles | 17–33 ms |
| Los Angelesamericas | 935 miles | 23–45 ms |
every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the small size assumed above, that is roughly 2,667 requests a day crossing that link.
Architecture, CAD & Engineering Firms hosting in Washington — FAQs
What size server does a Architecture, CAD & Engineering business in Washington need?
Where would the server for my Washington business actually run?
Is a VPS enough for Architecture, CAD & Engineering Firms, or do we need a dedicated server?
Can you host remote workstations for us?
Can we start smaller and grow?
Other industries in Washington
Same city, different workload.
Architecture, CAD & Engineering Firms hosting nearby
The same workload, in the nearest cities.