Timmins, Canada
Server infrastructure for Architecture, CAD & Engineering Firms in Timmins
Infrastructure for Architecture, CAD & Engineering Firms is a question of matching the machine to the application, then putting it near the people using it. For a medium Architecture, CAD & Engineering business in Timmins that is about 2 Cores, 24 GB of memory and 450 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Timmins. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small Architecture, CAD & Engineering
1–10 people · ~5,000 visits a month
$137.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 200 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium Architecture, CAD & Engineering Most likely here
11–50 people · ~50,000 visits a month
$289.30 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 450 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large Architecture, CAD & Engineering
51+ people · ~500,000 visits a month
$1,026.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why Architecture, CAD & Engineering Firms size up this way
Working from about 50,000 visits a month and roughly 26,667 requests a day, the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 0.6 req/sec at peak
- 16 GB working set
- 30 GB/month growth
- Windows
Which tiers suit Architecture, CAD & Engineering Firms
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
Architecture, CAD & Engineering Firms workloads you can host
- Remote workstations
- CAD & BIM models
- Rendering
- Project file storage
- Design collaboration
- Plot & print services
Architecture, CAD & Engineering in Timmins, business by business
These are not the same workload. Sized at the medium band, here is what each one actually needs.
| Business | Build | Tier | What decides it |
|---|---|---|---|
| Architecture Firms | 2 vCPU · 24 GB · 1500 GB | VDS | A remote workstation is only useful if it feels local — this is where pinned resources stop being a nicety. |
| Engineering Design | 6 vCPU · 96 GB · 1500 GB | Dedicated Server | FEA runs hold the entire mesh in memory, so RAM decides whether a model solves at all. |
| CAD Services | 2 vCPU · 24 GB · 800 GB | VDS | Bureau work means many client files in many formats, and translation is the CPU cost of accepting all of them. |
| 3D Design | 2 vCPU · 24 GB · 2000 GB | VDS | Rendering is where the hours go, and a GPU changes the working day rather than the benchmark. |
| Product Design | 2 vCPU · 24 GB · 800 GB | VDS | Revisions matter more than volume: making the wrong version is a tooling cost, not a reprint. |
| Surveying | 6 vCPU · 96 GB · 4000 GB | Dedicated Server | A single scan is a point cloud of hundreds of millions of points, and the client wants it years later. |
| GIS & Mapping | 6 vCPU · 96 GB · 3000 GB | Dedicated Server | Spatial queries and tile rendering are both CPU-hungry, and a cached basemap is what makes the map usable. |
| Drone Mapping | 6 vCPU · 96 GB · 3000 GB | Dedicated Server | Photogrammetry turns a thousand photographs into one model over many GPU-hours per flight. |
| Graphic Design | 2 vCPU · 24 GB · 1000 GB | VDS | Layered source files are far larger than anything the client ever sees, and every round is kept. |
| UI/UX Design | 1 vCPU · 3 GB · 600 GB | Shared Hosting | Session recordings from user testing are video, and they accumulate faster than the design files do. |
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Timmins is closest to Toronto. Every marker costs the same per month.
Show all 24 locations and distances from Timmins ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Toronto, Canada | 345 miles | 8–17 ms |
| Chicago, United States | 548 miles | 13–26 ms |
| New York, United States | 645 miles | 16–31 ms |
| Atlanta, United States | 1,029 miles | 25–50 ms |
| Dallas, United States | 1,348 miles | 33–65 ms |
| Miami, United States | 1,570 miles | 38–76 ms |
| Seattle, United States | 1,872 miles | 45–90 ms |
| Los Angeles, United States | 2,132 miles | 51–103 ms |
| Santa Clara, United States | 2,164 miles | 52–104 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 3,422 miles | 83–165 ms |
| Amsterdam, The Netherlands | 3,574 miles | 86–173 ms |
| Madrid, Spain | 3,703 miles | 89–179 ms |
| Stockholm, Sweden | 3,727 miles | 90–180 ms |
| Frankfurt, Germany | 3,797 miles | 92–183 ms |
| Milan, Italy | 4,010 miles | 97–194 ms |
| Bucharest, Romania | 4,666 miles | 113–225 ms |
| Tel Aviv, Israel | 5,621 miles | 136–271 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,100 miles | 147–294 ms |
| Delhi NCR, India | 6,956 miles | 168–336 ms |
| Hong Kong, China | 7,453 miles | 180–360 ms |
| Kolkata, India | 7,487 miles | 181–361 ms |
| Mumbai, India | 7,506 miles | 181–362 ms |
| Singapore | 8,981 miles | 217–434 ms |
| Sydney, Australia | 9,588 miles | 231–463 ms |
Distances are from Timmins. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
Architecture, CAD & Engineering Firms in Timmins
The closest of our 24 data centres to Timmins is Toronto, about 345 miles away. Choosing the closest data centre is the cheapest performance improvement available, and it costs nothing extra.
Timmins has a population of about 41,788, which is why the medium build above is the one most likely to fit a Architecture, CAD & Engineering business here — though the other two are a click away if it does not. Local time is America/Toronto, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to PIPEDA. Pricing is quoted in CAD, and the figure is the same wherever the machine physically sits.
Network reach from Timmins
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Timmins | Estimated round trip |
|---|---|---|
| Torontoamericas | 345 miles | 8–17 ms |
| Chicagoamericas | 548 miles | 13–26 ms |
| New Yorkamericas | 645 miles | 16–31 ms |
Timmins sits in Ontario, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 26,667 requests a day crossing that link.
Architecture, CAD & Engineering Firms hosting in Timmins — FAQs
What size server does a Architecture, CAD & Engineering business in Timmins, ON need?
Where would the server for my Timmins, ON business actually run?
Is a VPS enough for Architecture, CAD & Engineering Firms, or do we need a dedicated server?
Can you host remote workstations for us?
Can we start smaller and grow?
Other industries in Timmins
Same city, different workload.
Architecture, CAD & Engineering Firms hosting nearby
The same workload, in the nearest cities.