Saint George, United States
Server infrastructure for Architecture, CAD & Engineering Firms in Saint George
Infrastructure for Architecture, CAD & Engineering Firms is a question of matching the machine to the application, then putting it near the people using it. For a medium Architecture, CAD & Engineering business in Saint George that is about 2 Cores, 24 GB of memory and 450 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Saint George. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small Architecture, CAD & Engineering
1–10 people · ~5,000 visits a month
$137.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 200 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium Architecture, CAD & Engineering Most likely here
11–50 people · ~50,000 visits a month
$289.30 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 450 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large Architecture, CAD & Engineering
51+ people · ~500,000 visits a month
$1,026.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why Architecture, CAD & Engineering Firms size up this way
Working from about 50,000 visits a month and roughly 26,667 requests a day, the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 0.6 req/sec at peak
- 16 GB working set
- 30 GB/month growth
- Windows
Which tiers suit Architecture, CAD & Engineering Firms
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
Architecture, CAD & Engineering Firms workloads you can host
- Remote workstations
- CAD & BIM models
- Rendering
- Project file storage
- Design collaboration
- Plot & print services
Architecture, CAD & Engineering in Saint George, business by business
These are not the same workload. Sized at the medium band, here is what each one actually needs.
| Business | Build | Tier | What decides it |
|---|---|---|---|
| Architecture Firms | 2 vCPU · 24 GB · 1500 GB | VDS | A remote workstation is only useful if it feels local — this is where pinned resources stop being a nicety. |
| Engineering Design | 6 vCPU · 96 GB · 1500 GB | Dedicated Server | FEA runs hold the entire mesh in memory, so RAM decides whether a model solves at all. |
| CAD Services | 2 vCPU · 24 GB · 800 GB | VDS | Bureau work means many client files in many formats, and translation is the CPU cost of accepting all of them. |
| 3D Design | 2 vCPU · 24 GB · 2000 GB | VDS | Rendering is where the hours go, and a GPU changes the working day rather than the benchmark. |
| Product Design | 2 vCPU · 24 GB · 800 GB | VDS | Revisions matter more than volume: making the wrong version is a tooling cost, not a reprint. |
| Surveying | 6 vCPU · 96 GB · 4000 GB | Dedicated Server | A single scan is a point cloud of hundreds of millions of points, and the client wants it years later. |
| GIS & Mapping | 6 vCPU · 96 GB · 3000 GB | Dedicated Server | Spatial queries and tile rendering are both CPU-hungry, and a cached basemap is what makes the map usable. |
| Drone Mapping | 6 vCPU · 96 GB · 3000 GB | Dedicated Server | Photogrammetry turns a thousand photographs into one model over many GPU-hours per flight. |
| Graphic Design | 2 vCPU · 24 GB · 1000 GB | VDS | Layered source files are far larger than anything the client ever sees, and every round is kept. |
| UI/UX Design | 1 vCPU · 3 GB · 600 GB | Shared Hosting | Session recordings from user testing are video, and they accumulate faster than the design files do. |
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Saint George is closest to Los Angeles. Every marker costs the same per month.
Show all 24 locations and distances from Saint George ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Los Angeles, United States | 336 miles | 8–16 ms |
| Santa Clara, United States | 461 miles | 11–22 ms |
| Seattle, United States | 851 miles | 21–41 ms |
| Dallas, United States | 995 miles | 24–48 ms |
| Chicago, United States | 1,417 miles | 34–68 ms |
| Atlanta, United States | 1,653 miles | 40–80 ms |
| Toronto, Canada | 1,842 miles | 44–89 ms |
| Miami, United States | 2,105 miles | 51–102 ms |
| New York, United States | 2,124 miles | 51–103 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 5,117 miles | 124–247 ms |
| Stockholm, Sweden | 5,224 miles | 126–252 ms |
| Amsterdam, The Netherlands | 5,237 miles | 126–253 ms |
| Frankfurt, Germany | 5,462 miles | 132–264 ms |
| Madrid, Spain | 5,483 miles | 132–265 ms |
| Milan, Italy | 5,713 miles | 138–276 ms |
| Bucharest, Romania | 6,266 miles | 151–303 ms |
| Tel Aviv, Israel | 7,239 miles | 175–349 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 5,562 miles | 134–269 ms |
| Hong Kong, China | 7,288 miles | 176–352 ms |
| Sydney, Australia | 7,831 miles | 189–378 ms |
| Delhi NCR, India | 7,846 miles | 189–379 ms |
| Kolkata, India | 8,073 miles | 195–390 ms |
| Mumbai, India | 8,532 miles | 206–412 ms |
| Singapore | 8,861 miles | 214–428 ms |
Distances are from Saint George. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
Architecture, CAD & Engineering Firms in Saint George
The closest of our 24 data centres to Saint George is Los Angeles, about 336 miles away. Every kilometre between your users and the server is latency you cannot optimise away in software.
Saint George has a population of about 72,897, which is why the medium build above is the one most likely to fit a Architecture, CAD & Engineering business here — though the other two are a click away if it does not. Local time is America/Denver, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Saint George
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Saint George | Estimated round trip |
|---|---|---|
| Los Angelesamericas | 336 miles | 8–16 ms |
| Santa Claraamericas | 461 miles | 11–22 ms |
| Seattleamericas | 851 miles | 21–41 ms |
Saint George sits in Utah, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 26,667 requests a day crossing that link.
Architecture, CAD & Engineering Firms hosting in Saint George — FAQs
What size server does a Architecture, CAD & Engineering business in Saint George, UT need?
Where would the server for my Saint George, UT business actually run?
Is a VPS enough for Architecture, CAD & Engineering Firms, or do we need a dedicated server?
Can you host remote workstations for us?
Can we start smaller and grow?
Other industries in Saint George
Same city, different workload.
Architecture, CAD & Engineering Firms hosting nearby
The same workload, in the nearest cities.