Wollongong, Australia
Server infrastructure for 3D Design in Wollongong
There is no single correct server for 3D Design; there is a correct one for the workload, the volume and the budget. For a large 3D Design business in Wollongong that is about 6 Cores, 96 GB of memory and 4000 GB of storage on Dedicated Server.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Wollongong. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small 3D Design
1–10 people · ~5,000 visits a month
$191.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium 3D Design
11–50 people · ~50,000 visits a month
$498.55 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large 3D Design Most likely here
51+ people · ~500,000 visits a month
$1,296.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why 3D Design size up this way
Working from about 500,000 visits a month and roughly 266,667 requests a day, storage grows by roughly 480 GB a month at this size, which usually decides the build before CPU does; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered; and a GPU is genuinely used rather than optional, and is quoted separately.
- 6.2 req/sec at peak
- 64 GB working set
- 480 GB/month growth
- Windows
Which tiers suit 3D Design
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
3D Design workloads you can host
Rendering is where the hours go, and a GPU changes the working day rather than the benchmark.
- Modelling workstations
- Render queue
- Texture & material libraries
- Asset versioning
- Client previews
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Wollongong is closest to Sydney. Every marker costs the same per month.
Show all 24 locations and distances from Wollongong ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Asia-Pacific · 7 locations | ||
| Sydney, Australia | 42 miles | 1–2 ms |
| Singapore | 3,921 miles | 95–189 ms |
| Hong Kong, China | 4,603 miles | 111–222 ms |
| Tokyo, Japan | 4,897 miles | 118–236 ms |
| Kolkata, India | 5,685 miles | 137–274 ms |
| Mumbai, India | 6,309 miles | 152–305 ms |
| Delhi NCR, India | 6,473 miles | 156–313 ms |
| Americas · 9 locations | ||
| Santa Clara, United States | 7,468 miles | 180–361 ms |
| Los Angeles, United States | 7,536 miles | 182–364 ms |
| Seattle, United States | 7,788 miles | 188–376 ms |
| Dallas, United States | 8,616 miles | 208–416 ms |
| Chicago, United States | 9,277 miles | 224–448 ms |
| Atlanta, United States | 9,314 miles | 225–450 ms |
| Miami, United States | 9,357 miles | 226–452 ms |
| Toronto, Canada | 9,708 miles | 234–469 ms |
| New York, United States | 9,967 miles | 241–481 ms |
| Europe, Middle East & Africa · 8 locations | ||
| Tel Aviv, Israel | 8,805 miles | 213–425 ms |
| Bucharest, Romania | 9,469 miles | 229–457 ms |
| Stockholm, Sweden | 9,712 miles | 234–469 ms |
| Frankfurt, Germany | 10,254 miles | 248–495 ms |
| Milan, Italy | 10,294 miles | 248–497 ms |
| Amsterdam, The Netherlands | 10,357 miles | 250–500 ms |
| London, United Kingdom | 10,576 miles | 255–511 ms |
| Madrid, Spain | 10,988 miles | 265–531 ms |
Distances are from Wollongong. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
3D Design in Wollongong
The closest of our 24 data centres to Wollongong is Sydney, about 42 miles away. Every kilometre between your users and the server is latency you cannot optimise away in software.
Wollongong has a population of about 280,153, which is why the large build above is the one most likely to fit a 3D Design business here — though the other two are a click away if it does not. Local time is Australia/Sydney, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to the Privacy Act 1988. Pricing is quoted in AUD, and the figure is the same wherever the machine physically sits.
Network reach from Wollongong
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Wollongong | Estimated round trip |
|---|---|---|
| Sydneyapac | 42 miles | 1–2 ms |
| Singaporeapac | 3,921 miles | 95–189 ms |
| Hong Kongapac | 4,603 miles | 111–222 ms |
Wollongong sits in New South Wales, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the large size assumed above, that is roughly 266,667 requests a day crossing that link.
3D Design hosting in Wollongong — FAQs
What size server does a 3D Design business in Wollongong, NSW need?
Where would the server for my Wollongong, NSW business actually run?
Is a VPS enough for 3D Design, or do we need a dedicated server?
Can you host modelling workstations for us?
Can we start smaller and grow?
Other industries in Wollongong
Same city, different workload.
3D Design hosting nearby
The same workload, in the nearest cities.