The Hammocks, United States
Server infrastructure for 3D Design in The Hammocks
There is no single correct server for 3D Design; there is a correct one for the workload, the volume and the budget. For a medium 3D Design business in The Hammocks that is about 2 Cores, 24 GB of memory and 2000 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from The Hammocks. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small 3D Design
1–10 people · ~5,000 visits a month
$191.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium 3D Design Most likely here
11–50 people · ~50,000 visits a month
$498.55 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large 3D Design
51+ people · ~500,000 visits a month
$1,296.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why 3D Design size up this way
Working from about 50,000 visits a month and roughly 26,667 requests a day, storage grows by roughly 120 GB a month at this size, which usually decides the build before CPU does; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered; and a GPU is genuinely used rather than optional, and is quoted separately.
- 0.6 req/sec at peak
- 16 GB working set
- 120 GB/month growth
- Windows
Which tiers suit 3D Design
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
3D Design workloads you can host
Rendering is where the hours go, and a GPU changes the working day rather than the benchmark.
- Modelling workstations
- Render queue
- Texture & material libraries
- Asset versioning
- Client previews
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
The Hammocks has a data centre of its own. Every marker costs the same per month.
Show all 24 locations and distances from The Hammocks ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Miami, United States | Same city | 1–2 ms |
| Atlanta, United States | 606 miles | 15–29 ms |
| Dallas, United States | 1,100 miles | 27–53 ms |
| New York, United States | 1,103 miles | 27–53 ms |
| Chicago, United States | 1,192 miles | 29–58 ms |
| Toronto, Canada | 1,244 miles | 30–60 ms |
| Los Angeles, United States | 2,324 miles | 56–112 ms |
| Santa Clara, United States | 2,552 miles | 62–123 ms |
| Seattle, United States | 2,725 miles | 66–132 ms |
| Europe, Middle East & Africa · 8 locations | ||
| Madrid, Spain | 4,422 miles | 107–214 ms |
| London, United Kingdom | 4,444 miles | 107–215 ms |
| Amsterdam, The Netherlands | 4,642 miles | 112–224 ms |
| Frankfurt, Germany | 4,840 miles | 117–234 ms |
| Milan, Italy | 4,959 miles | 120–239 ms |
| Stockholm, Sweden | 4,993 miles | 121–241 ms |
| Bucharest, Romania | 5,742 miles | 139–277 ms |
| Tel Aviv, Israel | 6,596 miles | 159–318 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 7,455 miles | 180–360 ms |
| Delhi NCR, India | 8,413 miles | 203–406 ms |
| Mumbai, India | 8,863 miles | 214–428 ms |
| Hong Kong, China | 8,979 miles | 217–434 ms |
| Kolkata, India | 9,020 miles | 218–436 ms |
| Sydney, Australia | 9,320 miles | 225–450 ms |
| Singapore | 10,548 miles | 255–509 ms |
Distances are from The Hammocks. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
3D Design in The Hammocks
The closest of our 24 data centres to The Hammocks is Miami, about 17 miles away. Choosing the closest data centre is the cheapest performance improvement available, and it costs nothing extra.
The Hammocks has a population of about 51,003, which is why the medium build above is the one most likely to fit a 3D Design business here — though the other two are a click away if it does not. Local time is America/New York, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from The Hammocks
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from The Hammocks | Estimated round trip |
|---|---|---|
| Miamiamericas | In your metro | 1–2 ms |
| Atlantaamericas | 606 miles | 15–29 ms |
| Dallasamericas | 1,100 miles | 27–53 ms |
The Hammocks sits in Florida, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 26,667 requests a day crossing that link.
3D Design hosting in The Hammocks — FAQs
What size server does a 3D Design business in The Hammocks, FL need?
Where would the server for my The Hammocks, FL business actually run?
Is a VPS enough for 3D Design, or do we need a dedicated server?
Can you host modelling workstations for us?
Can we start smaller and grow?
Other industries in The Hammocks
Same city, different workload.
3D Design hosting nearby
The same workload, in the nearest cities.