Spruce Grove, Canada
Server infrastructure for 3D Design in Spruce Grove
There is no single correct server for 3D Design; there is a correct one for the workload, the volume and the budget. For a medium 3D Design business in Spruce Grove that is about 2 Cores, 24 GB of memory and 2000 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Spruce Grove. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small 3D Design
1–10 people · ~5,000 visits a month
$191.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium 3D Design Most likely here
11–50 people · ~50,000 visits a month
$498.55 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large 3D Design
51+ people · ~500,000 visits a month
$1,296.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why 3D Design size up this way
Working from about 50,000 visits a month and roughly 26,667 requests a day, storage grows by roughly 120 GB a month at this size, which usually decides the build before CPU does; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered; and a GPU is genuinely used rather than optional, and is quoted separately.
- 0.6 req/sec at peak
- 16 GB working set
- 120 GB/month growth
- Windows
Which tiers suit 3D Design
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
3D Design workloads you can host
Rendering is where the hours go, and a GPU changes the working day rather than the benchmark.
- Modelling workstations
- Render queue
- Texture & material libraries
- Asset versioning
- Client previews
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Spruce Grove is closest to Seattle. Every marker costs the same per month.
Show all 24 locations and distances from Spruce Grove ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Seattle, United States | 551 miles | 13–27 ms |
| Santa Clara, United States | 1,182 miles | 29–57 ms |
| Los Angeles, United States | 1,363 miles | 33–66 ms |
| Chicago, United States | 1,451 miles | 35–70 ms |
| Dallas, United States | 1,664 miles | 40–80 ms |
| Toronto, Canada | 1,698 miles | 41–82 ms |
| Atlanta, United States | 1,986 miles | 48–96 ms |
| New York, United States | 2,040 miles | 49–99 ms |
| Miami, United States | 2,582 miles | 62–125 ms |
| Europe, Middle East & Africa · 8 locations | ||
| Stockholm, Sweden | 4,196 miles | 101–203 ms |
| London, United Kingdom | 4,235 miles | 102–204 ms |
| Amsterdam, The Netherlands | 4,318 miles | 104–208 ms |
| Frankfurt, Germany | 4,539 miles | 110–219 ms |
| Madrid, Spain | 4,739 miles | 114–229 ms |
| Milan, Italy | 4,822 miles | 116–233 ms |
| Bucharest, Romania | 5,268 miles | 127–254 ms |
| Tel Aviv, Israel | 6,231 miles | 150–301 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 4,877 miles | 118–235 ms |
| Hong Kong, China | 6,463 miles | 156–312 ms |
| Delhi NCR, India | 6,726 miles | 162–325 ms |
| Kolkata, India | 7,012 miles | 169–339 ms |
| Mumbai, India | 7,404 miles | 179–357 ms |
| Singapore | 8,070 miles | 195–390 ms |
| Sydney, Australia | 8,246 miles | 199–398 ms |
Distances are from Spruce Grove. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
3D Design in Spruce Grove
The closest of our 24 data centres to Spruce Grove is Seattle, about 551 miles away. Choosing the closest data centre is the cheapest performance improvement available, and it costs nothing extra.
Spruce Grove has a population of about 38,985, which is why the medium build above is the one most likely to fit a 3D Design business here — though the other two are a click away if it does not. Local time is America/Edmonton, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to PIPEDA. Pricing is quoted in CAD, and the figure is the same wherever the machine physically sits.
Network reach from Spruce Grove
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Spruce Grove | Estimated round trip |
|---|---|---|
| Seattleamericas | 551 miles | 13–27 ms |
| Santa Claraamericas | 1,182 miles | 29–57 ms |
| Los Angelesamericas | 1,363 miles | 33–66 ms |
Spruce Grove sits in Alberta, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 26,667 requests a day crossing that link.
3D Design hosting in Spruce Grove — FAQs
What size server does a 3D Design business in Spruce Grove, AB need?
Where would the server for my Spruce Grove, AB business actually run?
Is a VPS enough for 3D Design, or do we need a dedicated server?
Can you host modelling workstations for us?
Can we start smaller and grow?
Other industries in Spruce Grove
Same city, different workload.
3D Design hosting nearby
The same workload, in the nearest cities.