Runcorn, United Kingdom
Server infrastructure for 3D Design in Runcorn
Sizing infrastructure for 3D Design starts with the workload, then works back to cores, memory and disk. For a medium 3D Design business in Runcorn that is about 2 Cores, 24 GB of memory and 2000 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Runcorn. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small 3D Design
1–10 people · ~5,000 visits a month
$191.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium 3D Design Most likely here
11–50 people · ~50,000 visits a month
$498.55 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large 3D Design
51+ people · ~500,000 visits a month
$1,296.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why 3D Design size up this way
Working from about 50,000 visits a month and roughly 26,667 requests a day, storage grows by roughly 120 GB a month at this size, which usually decides the build before CPU does; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered; and a GPU is genuinely used rather than optional, and is quoted separately.
- 0.6 req/sec at peak
- 16 GB working set
- 120 GB/month growth
- Windows
Which tiers suit 3D Design
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
3D Design workloads you can host
Rendering is where the hours go, and a GPU changes the working day rather than the benchmark.
- Modelling workstations
- Render queue
- Texture & material libraries
- Asset versioning
- Client previews
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Runcorn is closest to London. Every marker costs the same per month.
Show all 24 locations and distances from Runcorn ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 168 miles | 4–8 ms |
| Amsterdam, The Netherlands | 325 miles | 8–16 ms |
| Frankfurt, Germany | 536 miles | 13–26 ms |
| Milan, Italy | 762 miles | 18–37 ms |
| Stockholm, Sweden | 892 miles | 22–43 ms |
| Madrid, Spain | 894 miles | 22–43 ms |
| Bucharest, Romania | 1,435 miles | 35–69 ms |
| Tel Aviv, Israel | 2,361 miles | 57–114 ms |
| Americas · 9 locations | ||
| New York, United States | 3,320 miles | 80–160 ms |
| Toronto, Canada | 3,399 miles | 82–164 ms |
| Chicago, United States | 3,793 miles | 92–183 ms |
| Atlanta, United States | 4,064 miles | 98–196 ms |
| Miami, United States | 4,302 miles | 104–208 ms |
| Dallas, United States | 4,595 miles | 111–222 ms |
| Seattle, United States | 4,617 miles | 111–223 ms |
| Santa Clara, United States | 5,198 miles | 125–251 ms |
| Los Angeles, United States | 5,275 miles | 127–255 ms |
| Asia-Pacific · 7 locations | ||
| Delhi NCR, India | 4,267 miles | 103–206 ms |
| Mumbai, India | 4,579 miles | 111–221 ms |
| Kolkata, India | 5,023 miles | 121–243 ms |
| Tokyo, Japan | 5,887 miles | 142–284 ms |
| Hong Kong, China | 6,001 miles | 145–290 ms |
| Singapore | 6,819 miles | 165–329 ms |
| Sydney, Australia | 10,583 miles | 255–511 ms |
Distances are from Runcorn. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
3D Design in Runcorn
The closest of our 24 data centres to Runcorn is London, about 168 miles away. Every kilometre between your users and the server is latency you cannot optimise away in software.
Runcorn has a population of about 61,145, which is why the medium build above is the one most likely to fit a 3D Design business here — though the other two are a click away if it does not. Local time is Europe/London, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to the UK GDPR and the Data Protection Act 2018. Pricing is quoted in GBP, and the figure is the same wherever the machine physically sits.
Network reach from Runcorn
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Runcorn | Estimated round trip |
|---|---|---|
| Londonemea | 168 miles | 4–8 ms |
| Amsterdamemea | 325 miles | 8–16 ms |
| Frankfurtemea | 536 miles | 13–26 ms |
Runcorn sits in England, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 26,667 requests a day crossing that link.
3D Design hosting in Runcorn — FAQs
What size server does a 3D Design business in Runcorn, England need?
Where would the server for my Runcorn, England business actually run?
Is a VPS enough for 3D Design, or do we need a dedicated server?
Can you host modelling workstations for us?
Can we start smaller and grow?
Other industries in Runcorn
Same city, different workload.
3D Design hosting nearby
The same workload, in the nearest cities.