Parc-Extension, Canada
Server infrastructure for 3D Design in Parc-Extension
Infrastructure for 3D Design is a question of matching the machine to the application, then putting it near the people using it. For a medium 3D Design business in Parc-Extension that is about 2 Cores, 24 GB of memory and 2000 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Parc-Extension. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small 3D Design
1–10 people · ~5,000 visits a month
$191.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium 3D Design Most likely here
11–50 people · ~50,000 visits a month
$498.55 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large 3D Design
51+ people · ~500,000 visits a month
$1,296.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why 3D Design size up this way
Working from about 50,000 visits a month and roughly 26,667 requests a day, storage grows by roughly 120 GB a month at this size, which usually decides the build before CPU does; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered; and a GPU is genuinely used rather than optional, and is quoted separately.
- 0.6 req/sec at peak
- 16 GB working set
- 120 GB/month growth
- Windows
Which tiers suit 3D Design
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
3D Design workloads you can host
Rendering is where the hours go, and a GPU changes the working day rather than the benchmark.
- Modelling workstations
- Render queue
- Texture & material libraries
- Asset versioning
- Client previews
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Parc-Extension is closest to Toronto. Every marker costs the same per month.
Show all 24 locations and distances from Parc-Extension ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Toronto, Canada | 311 miles | 8–15 ms |
| New York, United States | 333 miles | 8–16 ms |
| Chicago, United States | 742 miles | 18–36 ms |
| Atlanta, United States | 993 miles | 24–48 ms |
| Miami, United States | 1,413 miles | 34–68 ms |
| Dallas, United States | 1,513 miles | 37–73 ms |
| Seattle, United States | 2,279 miles | 55–110 ms |
| Los Angeles, United States | 2,462 miles | 59–119 ms |
| Santa Clara, United States | 2,526 miles | 61–122 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 3,246 miles | 78–157 ms |
| Amsterdam, The Netherlands | 3,416 miles | 82–165 ms |
| Madrid, Spain | 3,440 miles | 83–166 ms |
| Frankfurt, Germany | 3,633 miles | 88–175 ms |
| Stockholm, Sweden | 3,655 miles | 88–176 ms |
| Milan, Italy | 3,817 miles | 92–184 ms |
| Bucharest, Romania | 4,525 miles | 109–218 ms |
| Tel Aviv, Israel | 5,455 miles | 132–263 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,454 miles | 156–312 ms |
| Delhi NCR, India | 7,005 miles | 169–338 ms |
| Mumbai, India | 7,503 miles | 181–362 ms |
| Kolkata, India | 7,597 miles | 183–367 ms |
| Hong Kong, China | 7,723 miles | 186–373 ms |
| Singapore | 9,194 miles | 222–444 ms |
| Sydney, Australia | 9,957 miles | 240–481 ms |
Distances are from Parc-Extension. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
3D Design in Parc-Extension
The closest of our 24 data centres to Parc-Extension is Toronto, about 311 miles away. Round-trip time is set by physical distance more than by anything else, so the nearest site is usually the right one.
Parc-Extension has a population of about 33,800, which is why the medium build above is the one most likely to fit a 3D Design business here — though the other two are a click away if it does not. Local time is America/Toronto, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to PIPEDA. Pricing is quoted in CAD, and the figure is the same wherever the machine physically sits.
Network reach from Parc-Extension
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Parc-Extension | Estimated round trip |
|---|---|---|
| Torontoamericas | 311 miles | 8–15 ms |
| New Yorkamericas | 333 miles | 8–16 ms |
| Chicagoamericas | 742 miles | 18–36 ms |
Parc-Extension sits in Quebec, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 26,667 requests a day crossing that link.
3D Design hosting in Parc-Extension — FAQs
What size server does a 3D Design business in Parc-Extension, QC need?
Where would the server for my Parc-Extension, QC business actually run?
Is a VPS enough for 3D Design, or do we need a dedicated server?
Can you host modelling workstations for us?
Can we start smaller and grow?
Other industries in Parc-Extension
Same city, different workload.
3D Design hosting nearby
The same workload, in the nearest cities.