Greenville, United States
Server infrastructure for 3D Design in Greenville
Infrastructure for 3D Design is a question of matching the machine to the application, then putting it near the people using it. For a medium 3D Design business in Greenville that is about 2 Cores, 24 GB of memory and 2000 GB of storage on VDS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Greenville. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small 3D Design
1–10 people · ~5,000 visits a month
$191.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium 3D Design Most likely here
11–50 people · ~50,000 visits a month
$498.55 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large 3D Design
51+ people · ~500,000 visits a month
$1,296.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why 3D Design size up this way
Working from about 50,000 visits a month and roughly 26,667 requests a day, storage grows by roughly 120 GB a month at this size, which usually decides the build before CPU does; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered; and a GPU is genuinely used rather than optional, and is quoted separately.
- 0.6 req/sec at peak
- 16 GB working set
- 120 GB/month growth
- Windows
Which tiers suit 3D Design
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
3D Design workloads you can host
Rendering is where the hours go, and a GPU changes the working day rather than the benchmark.
- Modelling workstations
- Render queue
- Texture & material libraries
- Asset versioning
- Client previews
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Greenville is closest to New York. Every marker costs the same per month.
Show all 24 locations and distances from Greenville ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| New York, United States | 397 miles | 10–19 ms |
| Atlanta, United States | 419 miles | 10–20 ms |
| Toronto, Canada | 566 miles | 14–27 ms |
| Miami, United States | 701 miles | 17–34 ms |
| Chicago, United States | 701 miles | 17–34 ms |
| Dallas, United States | 1,126 miles | 27–54 ms |
| Los Angeles, United States | 2,304 miles | 56–111 ms |
| Seattle, United States | 2,427 miles | 59–117 ms |
| Santa Clara, United States | 2,457 miles | 59–119 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 3,829 miles | 92–185 ms |
| Madrid, Spain | 3,905 miles | 94–189 ms |
| Amsterdam, The Netherlands | 4,017 miles | 97–194 ms |
| Frankfurt, Germany | 4,224 miles | 102–204 ms |
| Stockholm, Sweden | 4,319 miles | 104–209 ms |
| Milan, Italy | 4,374 miles | 106–211 ms |
| Bucharest, Romania | 5,126 miles | 124–247 ms |
| Tel Aviv, Israel | 6,022 miles | 145–291 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,966 miles | 168–336 ms |
| Delhi NCR, India | 7,710 miles | 186–372 ms |
| Mumbai, India | 8,186 miles | 198–395 ms |
| Kolkata, India | 8,310 miles | 201–401 ms |
| Hong Kong, China | 8,364 miles | 202–404 ms |
| Sydney, Australia | 9,705 miles | 234–469 ms |
| Singapore | 9,882 miles | 239–477 ms |
Distances are from Greenville. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
3D Design in Greenville
The closest of our 24 data centres to Greenville is New York, about 397 miles away. Round-trip time is set by physical distance more than by anything else, so the nearest site is usually the right one.
Greenville has a population of about 90,597, which is why the medium build above is the one most likely to fit a 3D Design business here — though the other two are a click away if it does not. Local time is America/New York, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Greenville
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Greenville | Estimated round trip |
|---|---|---|
| New Yorkamericas | 397 miles | 10–19 ms |
| Atlantaamericas | 419 miles | 10–20 ms |
| Torontoamericas | 566 miles | 14–27 ms |
Greenville sits in North Carolina, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 26,667 requests a day crossing that link.
3D Design hosting in Greenville — FAQs
What size server does a 3D Design business in Greenville, NC need?
Where would the server for my Greenville, NC business actually run?
Is a VPS enough for 3D Design, or do we need a dedicated server?
Can you host modelling workstations for us?
Can we start smaller and grow?
Other industries in Greenville
Same city, different workload.
3D Design hosting nearby
The same workload, in the nearest cities.