Frederickson, United States
Server infrastructure for 3D Design in Frederickson
The right server for 3D Design is decided by the work it has to do, not by the size of the plan you happen to land on. For a small 3D Design business in Frederickson that is about 2 Cores, 10 GB of memory and 600 GB of storage on VPS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Frederickson. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small 3D Design Most likely here
1–10 people · ~5,000 visits a month
$191.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium 3D Design
11–50 people · ~50,000 visits a month
$498.55 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large 3D Design
51+ people · ~500,000 visits a month
$1,296.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why 3D Design size up this way
Working from about 5,000 visits a month and roughly 2,667 requests a day, storage grows by roughly 42 GB a month at this size, which usually decides the build before CPU does; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered; and a GPU is genuinely used rather than optional, and is quoted separately.
- 0.1 req/sec at peak
- 5.6 GB working set
- 42 GB/month growth
- Windows
Which tiers suit 3D Design
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
3D Design workloads you can host
Rendering is where the hours go, and a GPU changes the working day rather than the benchmark.
- Modelling workstations
- Render queue
- Texture & material libraries
- Asset versioning
- Client previews
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Frederickson is closest to Seattle. Every marker costs the same per month.
Show all 24 locations and distances from Frederickson ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Seattle, United States | 35 miles | 1–2 ms |
| Santa Clara, United States | 673 miles | 16–33 ms |
| Los Angeles, United States | 926 miles | 22–45 ms |
| Dallas, United States | 1,664 miles | 40–80 ms |
| Chicago, United States | 1,734 miles | 42–84 ms |
| Toronto, Canada | 2,073 miles | 50–100 ms |
| Atlanta, United States | 2,172 miles | 52–105 ms |
| New York, United States | 2,408 miles | 58–116 ms |
| Miami, United States | 2,722 miles | 66–131 ms |
| Europe, Middle East & Africa · 8 locations | ||
| Stockholm, Sweden | 4,751 miles | 115–229 ms |
| London, United Kingdom | 4,814 miles | 116–232 ms |
| Amsterdam, The Netherlands | 4,894 miles | 118–236 ms |
| Frankfurt, Germany | 5,114 miles | 123–247 ms |
| Madrid, Spain | 5,314 miles | 128–257 ms |
| Milan, Italy | 5,399 miles | 130–261 ms |
| Bucharest, Romania | 5,828 miles | 141–281 ms |
| Tel Aviv, Israel | 6,784 miles | 164–328 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 4,802 miles | 116–232 ms |
| Hong Kong, China | 6,492 miles | 157–313 ms |
| Delhi NCR, India | 7,068 miles | 171–341 ms |
| Kolkata, India | 7,256 miles | 175–350 ms |
| Sydney, Australia | 7,732 miles | 187–373 ms |
| Mumbai, India | 7,767 miles | 188–375 ms |
| Singapore | 8,084 miles | 195–390 ms |
Distances are from Frederickson. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
3D Design in Frederickson
The closest of our 24 data centres to Frederickson is Seattle, about 35 miles away. Every kilometre between your users and the server is latency you cannot optimise away in software.
Frederickson has a population of about 18,719, which is why the small build above is the one most likely to fit a 3D Design business here — though the other two are a click away if it does not. Local time is America/Los Angeles, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Frederickson
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Frederickson | Estimated round trip |
|---|---|---|
| Seattleamericas | 35 miles | 1–2 ms |
| Santa Claraamericas | 673 miles | 16–33 ms |
| Los Angelesamericas | 926 miles | 22–45 ms |
Frederickson sits in Washington, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the small size assumed above, that is roughly 2,667 requests a day crossing that link.
3D Design hosting in Frederickson — FAQs
What size server does a 3D Design business in Frederickson, WA need?
Where would the server for my Frederickson, WA business actually run?
Is a VPS enough for 3D Design, or do we need a dedicated server?
Can you host modelling workstations for us?
Can we start smaller and grow?
Other industries in Frederickson
Same city, different workload.
3D Design hosting nearby
The same workload, in the nearest cities.