Bangkit, Singapore
Server infrastructure for 3D Design in Bangkit
Sizing infrastructure for 3D Design starts with the workload, then works back to cores, memory and disk. For a small 3D Design business in Bangkit that is about 2 Cores, 10 GB of memory and 600 GB of storage on VPS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Bangkit. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small 3D Design Most likely here
1–10 people · ~5,000 visits a month
$191.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium 3D Design
11–50 people · ~50,000 visits a month
$498.55 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large 3D Design
51+ people · ~500,000 visits a month
$1,296.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why 3D Design size up this way
Working from about 5,000 visits a month and roughly 2,667 requests a day, storage grows by roughly 42 GB a month at this size, which usually decides the build before CPU does; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered; and a GPU is genuinely used rather than optional, and is quoted separately.
- 0.1 req/sec at peak
- 5.6 GB working set
- 42 GB/month growth
- Windows
Which tiers suit 3D Design
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
3D Design workloads you can host
Rendering is where the hours go, and a GPU changes the working day rather than the benchmark.
- Modelling workstations
- Render queue
- Texture & material libraries
- Asset versioning
- Client previews
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Bangkit has a data centre of its own. Every marker costs the same per month.
Show all 24 locations and distances from Bangkit ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Asia-Pacific · 7 locations | ||
| Singapore | Same city | 1–2 ms |
| Hong Kong, China | 1,607 miles | 39–78 ms |
| Kolkata, India | 1,793 miles | 43–87 ms |
| Mumbai, India | 2,422 miles | 58–117 ms |
| Delhi NCR, India | 2,559 miles | 62–124 ms |
| Tokyo, Japan | 3,301 miles | 80–159 ms |
| Sydney, Australia | 3,922 miles | 95–189 ms |
| Europe, Middle East & Africa · 8 locations | ||
| Tel Aviv, Israel | 4,944 miles | 119–239 ms |
| Bucharest, Romania | 5,545 miles | 134–268 ms |
| Stockholm, Sweden | 5,985 miles | 144–289 ms |
| Frankfurt, Germany | 6,370 miles | 154–308 ms |
| Milan, Italy | 6,372 miles | 154–308 ms |
| Amsterdam, The Netherlands | 6,516 miles | 157–315 ms |
| London, United Kingdom | 6,737 miles | 163–325 ms |
| Madrid, Spain | 7,068 miles | 171–341 ms |
| Americas · 9 locations | ||
| Seattle, United States | 8,064 miles | 195–389 ms |
| Santa Clara, United States | 8,477 miles | 205–409 ms |
| Los Angeles, United States | 8,775 miles | 212–424 ms |
| Toronto, Canada | 9,319 miles | 225–450 ms |
| Chicago, United States | 9,364 miles | 226–452 ms |
| New York, United States | 9,525 miles | 230–460 ms |
| Dallas, United States | 9,722 miles | 235–469 ms |
| Atlanta, United States | 9,952 miles | 240–481 ms |
| Miami, United States | 10,543 miles | 255–509 ms |
Distances are from Bangkit. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
3D Design in Bangkit
The closest of our 24 data centres to Bangkit is Singapore, about 4 miles away. Round-trip time is set by physical distance more than by anything else, so the nearest site is usually the right one.
Bangkit has a population of about 21,010, which is why the small build above is the one most likely to fit a 3D Design business here — though the other two are a click away if it does not. Local time is Asia/Singapore, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to the PDPA. Pricing is quoted in SGD, and the figure is the same wherever the machine physically sits.
Network reach from Bangkit
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Bangkit | Estimated round trip |
|---|---|---|
| Singaporeapac | In your metro | 1–2 ms |
| Hong Kongapac | 1,607 miles | 39–78 ms |
| Kolkataapac | 1,793 miles | 43–87 ms |
every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the small size assumed above, that is roughly 2,667 requests a day crossing that link.
3D Design hosting in Bangkit — FAQs
What size server does a 3D Design business in Bangkit, Singapore need?
Where would the server for my Bangkit, Singapore business actually run?
Is a VPS enough for 3D Design, or do we need a dedicated server?
Can you host modelling workstations for us?
Can we start smaller and grow?
Other industries in Bangkit
Same city, different workload.
3D Design hosting nearby
The same workload, in the nearest cities.