Hobart, Australia
Server infrastructure for 3D Design in Hobart
Most 3D Design outgrow their first server in one specific place — and it is rarely the one the plan name suggests. For a large 3D Design business in Hobart that is about 6 Cores, 96 GB of memory and 4000 GB of storage on Dedicated Server.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Hobart. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small 3D Design
1–10 people · ~5,000 visits a month
$191.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium 3D Design
11–50 people · ~50,000 visits a month
$498.55 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large 3D Design Most likely here
51+ people · ~500,000 visits a month
$1,296.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why 3D Design size up this way
Working from about 500,000 visits a month and roughly 266,667 requests a day, storage grows by roughly 480 GB a month at this size, which usually decides the build before CPU does; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered; and a GPU is genuinely used rather than optional, and is quoted separately.
- 6.2 req/sec at peak
- 64 GB working set
- 480 GB/month growth
- Windows
Which tiers suit 3D Design
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
3D Design workloads you can host
Rendering is where the hours go, and a GPU changes the working day rather than the benchmark.
- Modelling workstations
- Render queue
- Texture & material libraries
- Asset versioning
- Client previews
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Hobart is closest to Sydney. Every marker costs the same per month.
Show all 24 locations and distances from Hobart ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Asia-Pacific · 7 locations | ||
| Sydney, Australia | 657 miles | 16–32 ms |
| Singapore | 4,075 miles | 98–197 ms |
| Hong Kong, China | 4,974 miles | 120–240 ms |
| Tokyo, Japan | 5,449 miles | 132–263 ms |
| Kolkata, India | 5,871 miles | 142–283 ms |
| Mumbai, India | 6,364 miles | 154–307 ms |
| Delhi NCR, India | 6,632 miles | 160–320 ms |
| Americas · 9 locations | ||
| Santa Clara, United States | 7,935 miles | 192–383 ms |
| Los Angeles, United States | 7,969 miles | 192–385 ms |
| Seattle, United States | 8,316 miles | 201–402 ms |
| Dallas, United States | 8,954 miles | 216–432 ms |
| Miami, United States | 9,525 miles | 230–460 ms |
| Atlanta, United States | 9,609 miles | 232–464 ms |
| Chicago, United States | 9,682 miles | 234–467 ms |
| Toronto, Canada | 10,118 miles | 244–488 ms |
| New York, United States | 10,324 miles | 249–498 ms |
| Europe, Middle East & Africa · 8 locations | ||
| Tel Aviv, Israel | 8,763 miles | 212–423 ms |
| Bucharest, Romania | 9,561 miles | 231–462 ms |
| Stockholm, Sweden | 10,037 miles | 242–485 ms |
| Milan, Italy | 10,378 miles | 251–501 ms |
| Frankfurt, Germany | 10,435 miles | 252–504 ms |
| Amsterdam, The Netherlands | 10,593 miles | 256–511 ms |
| London, United Kingdom | 10,813 miles | 261–522 ms |
| Madrid, Spain | 10,939 miles | 264–528 ms |
Distances are from Hobart. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
3D Design in Hobart
We work with businesses across the CBD, Salamanca, Battery Point, Sandy Bay and North Hobart. Hobart is a compact, review-led market where local relevance matters most.
The closest of our 24 data centres to Hobart is Sydney, about 657 miles away. Every kilometre between your users and the server is latency you cannot optimise away in software.
Hobart has a population of about 254,930, which is why the large build above is the one most likely to fit a 3D Design business here — though the other two are a click away if it does not. Local time is Australia/Hobart, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to the Privacy Act 1988. Pricing is quoted in AUD, and the figure is the same wherever the machine physically sits.
Network reach from Hobart
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Hobart | Estimated round trip |
|---|---|---|
| Sydneyapac | 657 miles | 16–32 ms |
| Singaporeapac | 4,075 miles | 98–197 ms |
| Hong Kongapac | 4,974 miles | 120–240 ms |
Hobart sits in Tasmania, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the large size assumed above, that is roughly 266,667 requests a day crossing that link.
3D Design hosting in Hobart — FAQs
What size server does a 3D Design business in Hobart, TAS need?
Where would the server for my Hobart, TAS business actually run?
Is a VPS enough for 3D Design, or do we need a dedicated server?
Can you host modelling workstations for us?
Can we start smaller and grow?
Other industries in Hobart
Same city, different workload.
3D Design hosting nearby
The same workload, in the nearest cities.