Mount Martha, Australia
Server infrastructure for 3D Design in Mount Martha
There is no single correct server for 3D Design; there is a correct one for the workload, the volume and the budget. For a small 3D Design business in Mount Martha that is about 2 Cores, 10 GB of memory and 600 GB of storage on VPS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Mount Martha. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small 3D Design Most likely here
1–10 people · ~5,000 visits a month
$191.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 600 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium 3D Design
11–50 people · ~50,000 visits a month
$498.55 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large 3D Design
51+ people · ~500,000 visits a month
$1,296.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 4000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why 3D Design size up this way
Working from about 5,000 visits a month and roughly 2,667 requests a day, storage grows by roughly 42 GB a month at this size, which usually decides the build before CPU does; each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site; the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered; and a GPU is genuinely used rather than optional, and is quoted separately.
- 0.1 req/sec at peak
- 5.6 GB working set
- 42 GB/month growth
- Windows
Which tiers suit 3D Design
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
3D Design workloads you can host
Rendering is where the hours go, and a GPU changes the working day rather than the benchmark.
- Modelling workstations
- Render queue
- Texture & material libraries
- Asset versioning
- Client previews
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Mount Martha is closest to Sydney. Every marker costs the same per month.
Show all 24 locations and distances from Mount Martha ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Asia-Pacific · 7 locations | ||
| Sydney, Australia | 460 miles | 11–22 ms |
| Singapore | 3,788 miles | 91–183 ms |
| Hong Kong, China | 4,639 miles | 112–224 ms |
| Tokyo, Japan | 5,120 miles | 124–247 ms |
| Kolkata, India | 5,579 miles | 135–269 ms |
| Mumbai, India | 6,119 miles | 148–295 ms |
| Delhi NCR, India | 6,350 miles | 153–307 ms |
| Americas · 9 locations | ||
| Santa Clara, United States | 7,885 miles | 190–381 ms |
| Los Angeles, United States | 7,948 miles | 192–384 ms |
| Seattle, United States | 8,209 miles | 198–396 ms |
| Dallas, United States | 9,004 miles | 217–435 ms |
| Miami, United States | 9,681 miles | 234–467 ms |
| Chicago, United States | 9,686 miles | 234–468 ms |
| Atlanta, United States | 9,691 miles | 234–468 ms |
| Toronto, Canada | 10,119 miles | 244–489 ms |
| New York, United States | 10,366 miles | 250–500 ms |
| Europe, Middle East & Africa · 8 locations | ||
| Tel Aviv, Israel | 8,567 miles | 207–414 ms |
| Bucharest, Romania | 9,314 miles | 225–450 ms |
| Stockholm, Sweden | 9,719 miles | 235–469 ms |
| Milan, Italy | 10,140 miles | 245–490 ms |
| Frankfurt, Germany | 10,162 miles | 245–491 ms |
| Amsterdam, The Netherlands | 10,304 miles | 249–497 ms |
| London, United Kingdom | 10,526 miles | 254–508 ms |
| Madrid, Spain | 10,768 miles | 260–520 ms |
Distances are from Mount Martha. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
3D Design in Mount Martha
The closest of our 24 data centres to Mount Martha is Sydney, about 460 miles away. Choosing the closest data centre is the cheapest performance improvement available, and it costs nothing extra.
Mount Martha has a population of about 19,846, which is why the small build above is the one most likely to fit a 3D Design business here — though the other two are a click away if it does not. Local time is Australia/Melbourne, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to the Privacy Act 1988. Pricing is quoted in AUD, and the figure is the same wherever the machine physically sits.
Network reach from Mount Martha
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Mount Martha | Estimated round trip |
|---|---|---|
| Sydneyapac | 460 miles | 11–22 ms |
| Singaporeapac | 3,788 miles | 91–183 ms |
| Hong Kongapac | 4,639 miles | 112–224 ms |
Mount Martha sits in Victoria, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the small size assumed above, that is roughly 2,667 requests a day crossing that link.
3D Design hosting in Mount Martha — FAQs
What size server does a 3D Design business in Mount Martha, VIC need?
Where would the server for my Mount Martha, VIC business actually run?
Is a VPS enough for 3D Design, or do we need a dedicated server?
Can you host modelling workstations for us?
Can we start smaller and grow?
Other industries in Mount Martha
Same city, different workload.
3D Design hosting nearby
The same workload, in the nearest cities.