Coram, United States
Server infrastructure for Oil & Gas in Coram
Sizing infrastructure for Oil & Gas starts with the workload, then works back to cores, memory and disk. For a medium Oil & Gas business in Coram that is about 8 Cores, 128 GB of memory and 4000 GB of storage on Dedicated Server.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Coram. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small Oil & Gas
1–10 people · ~5,000 visits a month
$601.15 USD USD
per month · VDS
- 4 Cores
- 48 GB RAM
- 1500 GB storage
- Managed
About 0.6 requests a second at peak, holding roughly 33.6 GB of working data.
Configure this build →Medium Oil & Gas Most likely here
11–50 people · ~50,000 visits a month
$1,546.15 USD USD
per month · Dedicated Server
- 8 Cores
- 128 GB RAM
- 4000 GB storage
- Managed
About 6.2 requests a second at peak, holding roughly 96 GB of working data.
Configure this build →Large Oil & Gas
51+ people · ~500,000 visits a month
$4,063.90 USD USD
per month · Bare Metal
- 28 Cores
- 448 GB RAM
- 4000 GB storage
- Managed
About 61.7 requests a second at peak, holding roughly 384 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why Oil & Gas size up this way
Working from about 50,000 visits a month and roughly 213,333 requests a day, storage grows by roughly 300 GB a month at this size, which usually decides the build before CPU does; and about 96 GB of data needs to stay in memory to keep queries fast.
- 6.2 req/sec at peak
- 96 GB working set
- 300 GB/month growth
- Linux
Which tiers suit Oil & Gas
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | An ERP or practice-management system needs a database tuned to its own workload, which a shared platform will not allow. |
| VPS Flexible virtual infrastructure with full root access | Workable | Enough for a small team, though the working set of a records system tends to outgrow a modest instance quickly. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed memory is what keeps the database in cache, which is the single biggest factor in how fast these systems feel. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The usual answer: a records system rewards a large, uncontended memory pool and consistent disk latency. |
| Bare Metal Physical compute for sustained, demanding workloads | Workable | For large deployments, or where the database and application tiers are virtualized onto one physical host. |
Oil & Gas workloads you can host
Seismic archives are measured in terabytes and are consulted rarely but must never be lost.
- Well & production data
- Seismic data archive
- Pipeline monitoring
- HSE records
- Reserves reporting
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Coram is closest to New York. Every marker costs the same per month.
Show all 24 locations and distances from Coram ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| New York, United States | 54 miles | 1–3 ms |
| Toronto, Canada | 379 miles | 9–18 ms |
| Chicago, United States | 761 miles | 18–37 ms |
| Atlanta, United States | 795 miles | 19–38 ms |
| Miami, United States | 1,122 miles | 27–54 ms |
| Dallas, United States | 1,424 miles | 34–69 ms |
| Seattle, United States | 2,443 miles | 59–118 ms |
| Los Angeles, United States | 2,497 miles | 60–121 ms |
| Santa Clara, United States | 2,601 miles | 63–126 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 3,413 miles | 82–165 ms |
| Madrid, Spain | 3,532 miles | 85–171 ms |
| Amsterdam, The Netherlands | 3,596 miles | 87–174 ms |
| Frankfurt, Germany | 3,807 miles | 92–184 ms |
| Stockholm, Sweden | 3,886 miles | 94–188 ms |
| Milan, Italy | 3,967 miles | 96–192 ms |
| Bucharest, Romania | 4,707 miles | 114–227 ms |
| Tel Aviv, Israel | 5,615 miles | 136–271 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,757 miles | 163–326 ms |
| Delhi NCR, India | 7,280 miles | 176–351 ms |
| Mumbai, India | 7,752 miles | 187–374 ms |
| Kolkata, India | 7,893 miles | 191–381 ms |
| Hong Kong, China | 8,047 miles | 194–388 ms |
| Singapore | 9,513 miles | 230–459 ms |
| Sydney, Australia | 9,988 miles | 241–482 ms |
Distances are from Coram. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
Oil & Gas in Coram
The closest of our 24 data centres to Coram is New York, about 54 miles away. Round-trip time is set by physical distance more than by anything else, so the nearest site is usually the right one.
Coram has a population of about 39,113, which is why the medium build above is the one most likely to fit a Oil & Gas business here — though the other two are a click away if it does not. Local time is America/New York, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Coram
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Coram | Estimated round trip |
|---|---|---|
| New Yorkamericas | 54 miles | 1–3 ms |
| Torontoamericas | 379 miles | 9–18 ms |
| Chicagoamericas | 761 miles | 18–37 ms |
Coram sits in New York, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 213,333 requests a day crossing that link.
Oil & Gas hosting in Coram — FAQs
What size server does a Oil & Gas business in Coram, NY need?
Where would the server for my Coram, NY business actually run?
Is a VPS enough for Oil & Gas, or do we need a dedicated server?
Can you host well & production data for us?
Can we start smaller and grow?
Other industries in Coram
Same city, different workload.
Oil & Gas hosting nearby
The same workload, in the nearest cities.