Port Arthur, United States
Server infrastructure for Market Data Providers in Port Arthur
Sizing infrastructure for Market Data Providers starts with the workload, then works back to cores, memory and disk. For a medium Market Data Providers business in Port Arthur that is about 6 Cores, 96 GB of memory and 4000 GB of storage on Dedicated Server.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Port Arthur. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small Market Data Providers
1–10 people · ~5,000 visits a month
$502.60 USD USD
per month · VDS
- 2 Cores
- 32 GB RAM
- 1500 GB storage
About 0.2 requests a second at peak, holding roughly 22.4 GB of working data.
Configure this build →Medium Market Data Providers Most likely here
11–50 people · ~50,000 visits a month
$1,296.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 4000 GB storage
- Managed
About 2.3 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →Large Market Data Providers
51+ people · ~500,000 visits a month
$3,070.30 USD USD
per month · Bare Metal
- 20 Cores
- 320 GB RAM
- 4000 GB storage
- Managed
About 23.2 requests a second at peak, holding roughly 256 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why Market Data Providers size up this way
Working from about 50,000 visits a month and roughly 50,000 requests a day, storage grows by roughly 300 GB a month at this size, which usually decides the build before CPU does; about 64 GB of data needs to stay in memory to keep queries fast; and each request costs real computation rather than a cache lookup, so cores matter more here than on a typical site.
- 2.3 req/sec at peak
- 64 GB working set
- 300 GB/month growth
- Linux
Which tiers suit Market Data Providers
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Persistent connections and custom ports are exactly what a shared platform does not permit. |
| VPS Flexible virtual infrastructure with full root access | Workable | Enough for a small server or a test instance, though a noisy neighbour shows up immediately as jitter. |
| VDS Virtual server with resources pinned to you alone | Recommended | Pinned cores are what keep tick rate and call quality steady; on a contended instance they are not. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | Single-tenant hardware removes the last source of variance, which is what these workloads are judged on. |
| Bare Metal Physical compute for sustained, demanding workloads | Workable | For operators running many instances at once on hardware they control. |
Market Data Providers workloads you can host
Ingest never stops and the archive never shrinks — this is a storage and throughput problem before anything else.
- Feed ingestion
- Normalisation
- Historical tick archive
- Distribution API
- Snapshot & replay
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Port Arthur is closest to Dallas. Every marker costs the same per month.
Show all 24 locations and distances from Port Arthur ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Dallas, United States | 261 miles | 6–13 ms |
| Atlanta, United States | 621 miles | 15–30 ms |
| Miami, United States | 886 miles | 21–43 ms |
| Chicago, United States | 900 miles | 22–43 ms |
| Toronto, Canada | 1,243 miles | 30–60 ms |
| New York, United States | 1,345 miles | 32–65 ms |
| Los Angeles, United States | 1,450 miles | 35–70 ms |
| Santa Clara, United States | 1,685 miles | 41–81 ms |
| Seattle, United States | 1,941 miles | 47–94 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 4,786 miles | 116–231 ms |
| Madrid, Spain | 4,928 miles | 119–238 ms |
| Amsterdam, The Netherlands | 4,957 miles | 120–239 ms |
| Stockholm, Sweden | 5,166 miles | 125–249 ms |
| Frankfurt, Germany | 5,174 miles | 125–250 ms |
| Milan, Italy | 5,352 miles | 129–258 ms |
| Bucharest, Romania | 6,065 miles | 146–293 ms |
| Tel Aviv, Israel | 6,995 miles | 169–338 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,724 miles | 162–325 ms |
| Delhi NCR, India | 8,360 miles | 202–404 ms |
| Hong Kong, China | 8,375 miles | 202–404 ms |
| Sydney, Australia | 8,669 miles | 209–419 ms |
| Kolkata, India | 8,809 miles | 213–425 ms |
| Mumbai, India | 8,942 miles | 216–432 ms |
| Singapore | 9,981 miles | 241–482 ms |
Distances are from Port Arthur. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
Market Data Providers in Port Arthur
The closest of our 24 data centres to Port Arthur is Dallas, about 261 miles away. Choosing the closest data centre is the cheapest performance improvement available, and it costs nothing extra.
Port Arthur has a population of about 55,340, which is why the medium build above is the one most likely to fit a Market Data Providers business here — though the other two are a click away if it does not. Local time is America/Chicago, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Port Arthur
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Port Arthur | Estimated round trip |
|---|---|---|
| Dallasamericas | 261 miles | 6–13 ms |
| Atlantaamericas | 621 miles | 15–30 ms |
| Miamiamericas | 886 miles | 21–43 ms |
Port Arthur sits in Texas, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the medium size assumed above, that is roughly 50,000 requests a day crossing that link.
Market Data Providers hosting in Port Arthur — FAQs
What size server does a Market Data Providers business in Port Arthur, TX need?
Where would the server for my Port Arthur, TX business actually run?
Is a VPS enough for Market Data Providers, or do we need a dedicated server?
Can you host feed ingestion for us?
Can we start smaller and grow?
Other industries in Port Arthur
Same city, different workload.
Market Data Providers hosting nearby
The same workload, in the nearest cities.