Griffin, United States
Server infrastructure for Architecture, CAD & Engineering Firms in Griffin
The right server for Architecture, CAD & Engineering Firms is decided by the work it has to do, not by the size of the plan you happen to land on. For a small Architecture, CAD & Engineering business in Griffin that is about 2 Cores, 10 GB of memory and 200 GB of storage on VPS.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Griffin. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small Architecture, CAD & Engineering Most likely here
1–10 people · ~5,000 visits a month
$137.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 200 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium Architecture, CAD & Engineering
11–50 people · ~50,000 visits a month
$289.30 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 450 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large Architecture, CAD & Engineering
51+ people · ~500,000 visits a month
$1,026.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why Architecture, CAD & Engineering Firms size up this way
Working from about 5,000 visits a month and roughly 2,667 requests a day, the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 0.1 req/sec at peak
- 5.6 GB working set
- 11 GB/month growth
- Windows
Which tiers suit Architecture, CAD & Engineering Firms
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
Architecture, CAD & Engineering Firms workloads you can host
- Remote workstations
- CAD & BIM models
- Rendering
- Project file storage
- Design collaboration
- Plot & print services
Architecture, CAD & Engineering in Griffin, business by business
These are not the same workload. Sized at the small band, here is what each one actually needs.
| Business | Build | Tier | What decides it |
|---|---|---|---|
| Architecture Firms | 2 vCPU · 10 GB · 450 GB | VPS | A remote workstation is only useful if it feels local — this is where pinned resources stop being a nicety. |
| Engineering Design | 2 vCPU · 32 GB · 400 GB | VDS | FEA runs hold the entire mesh in memory, so RAM decides whether a model solves at all. |
| CAD Services | 2 vCPU · 10 GB · 300 GB | VPS | Bureau work means many client files in many formats, and translation is the CPU cost of accepting all of them. |
| 3D Design | 2 vCPU · 10 GB · 600 GB | VPS | Rendering is where the hours go, and a GPU changes the working day rather than the benchmark. |
| Product Design | 2 vCPU · 10 GB · 300 GB | VPS | Revisions matter more than volume: making the wrong version is a tooling cost, not a reprint. |
| Surveying | 2 vCPU · 32 GB · 1500 GB | VDS | A single scan is a point cloud of hundreds of millions of points, and the client wants it years later. |
| GIS & Mapping | 2 vCPU · 32 GB · 800 GB | VDS | Spatial queries and tile rendering are both CPU-hungry, and a cached basemap is what makes the map usable. |
| Drone Mapping | 2 vCPU · 32 GB · 1500 GB | VDS | Photogrammetry turns a thousand photographs into one model over many GPU-hours per flight. |
| Graphic Design | 2 vCPU · 10 GB · 350 GB | VPS | Layered source files are far larger than anything the client ever sees, and every round is kept. |
| UI/UX Design | 1 vCPU · 3 GB · 250 GB | Shared Hosting | Session recordings from user testing are video, and they accumulate faster than the design files do. |
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Griffin is closest to Atlanta. Every marker costs the same per month.
Show all 24 locations and distances from Griffin ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Atlanta, United States | 35 miles | 1–2 ms |
| Miami, United States | 572 miles | 14–28 ms |
| Chicago, United States | 624 miles | 15–30 ms |
| Dallas, United States | 726 miles | 18–35 ms |
| New York, United States | 765 miles | 18–37 ms |
| Toronto, Canada | 766 miles | 18–37 ms |
| Los Angeles, United States | 1,946 miles | 47–94 ms |
| Santa Clara, United States | 2,130 miles | 51–103 ms |
| Seattle, United States | 2,205 miles | 53–106 ms |
| Europe, Middle East & Africa · 8 locations | ||
| London, United Kingdom | 4,226 miles | 102–204 ms |
| Madrid, Spain | 4,327 miles | 104–209 ms |
| Amsterdam, The Netherlands | 4,408 miles | 106–213 ms |
| Frankfurt, Germany | 4,619 miles | 112–223 ms |
| Stockholm, Sweden | 4,673 miles | 113–226 ms |
| Milan, Italy | 4,780 miles | 115–231 ms |
| Bucharest, Romania | 5,518 miles | 133–266 ms |
| Tel Aviv, Israel | 6,428 miles | 155–310 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 6,893 miles | 166–333 ms |
| Delhi NCR, India | 8,002 miles | 193–386 ms |
| Hong Kong, China | 8,410 miles | 203–406 ms |
| Mumbai, India | 8,520 miles | 206–411 ms |
| Kolkata, India | 8,550 miles | 206–413 ms |
| Sydney, Australia | 9,283 miles | 224–448 ms |
| Singapore | 9,989 miles | 241–482 ms |
Distances are from Griffin. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
Architecture, CAD & Engineering Firms in Griffin
The closest of our 24 data centres to Griffin is Atlanta, about 35 miles away. Every kilometre between your users and the server is latency you cannot optimise away in software.
Griffin has a population of about 23,211, which is why the small build above is the one most likely to fit a Architecture, CAD & Engineering business here — though the other two are a click away if it does not. Local time is America/New York, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to state privacy laws such as the CCPA. Pricing is quoted in USD, and the figure is the same wherever the machine physically sits.
Network reach from Griffin
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Griffin | Estimated round trip |
|---|---|---|
| Atlantaamericas | 35 miles | 1–2 ms |
| Miamiamericas | 572 miles | 14–28 ms |
| Chicagoamericas | 624 miles | 15–30 ms |
Griffin sits in Georgia, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the small size assumed above, that is roughly 2,667 requests a day crossing that link.
Architecture, CAD & Engineering Firms hosting in Griffin — FAQs
What size server does a Architecture, CAD & Engineering business in Griffin, GA need?
Where would the server for my Griffin, GA business actually run?
Is a VPS enough for Architecture, CAD & Engineering Firms, or do we need a dedicated server?
Can you host remote workstations for us?
Can we start smaller and grow?
Other industries in Griffin
Same city, different workload.
Architecture, CAD & Engineering Firms hosting nearby
The same workload, in the nearest cities.