Edmonton, Canada
Server infrastructure for Architecture, CAD & Engineering Firms in Edmonton
Sizing infrastructure for Architecture, CAD & Engineering Firms starts with the workload, then works back to cores, memory and disk. For a large Architecture, CAD & Engineering business in Edmonton that is about 6 Cores, 96 GB of memory and 2000 GB of storage on Dedicated Server.
- ✓ 5 infrastructure tiers
- ✓ Sized for your workload, not a plan name
- ✓ Same price in all 24 locations
Estimated from fibre distance, not measured from Edmonton. Your real figure depends on your connection and route, and lands inside this range.
Choose the infrastructure for your workload
Three sizes of business, each sized from an assumed traffic figure rather than a measured one. If you know your own numbers, tell us and the estimate changes with them.
Small Architecture, CAD & Engineering
1–10 people · ~5,000 visits a month
$137.90 USD USD
per month · VPS
- 2 Cores
- 10 GB RAM
- 200 GB storage
- GPU on request
About 0.1 requests a second at peak, holding roughly 5.6 GB of working data.
Configure this build →Medium Architecture, CAD & Engineering
11–50 people · ~50,000 visits a month
$289.30 USD USD
per month · VDS
- 2 Cores
- 24 GB RAM
- 450 GB storage
- Managed
- GPU on request
About 0.6 requests a second at peak, holding roughly 16 GB of working data.
Configure this build →Large Architecture, CAD & Engineering Most likely here
51+ people · ~500,000 visits a month
$1,026.40 USD USD
per month · Dedicated Server
- 6 Cores
- 96 GB RAM
- 2000 GB storage
- Managed
- GPU on request
About 6.2 requests a second at peak, holding roughly 64 GB of working data.
Configure this build →These figures are assumptions stated out loud, not predictions about your business. Memory, cores and disk can all be raised on the same server later, usually within the hour, with no rebuild and no new IP address — so starting one size below the estimate is normally the cheaper mistake.
Why Architecture, CAD & Engineering Firms size up this way
Working from about 500,000 visits a month and roughly 266,667 requests a day, the software is Windows-based, which sets a floor on cores, memory and disk before the workload is considered.
- 6.2 req/sec at peak
- 64 GB working set
- 120 GB/month growth
- Windows
Which tiers suit Architecture, CAD & Engineering Firms
Including the ones that do not, and why — that is usually the more useful half.
| Infrastructure | Verdict | Why |
|---|---|---|
| Shared Hosting Managed space on a shared server | Not this one | Shared hosting serves websites; it cannot present a Windows desktop to work on. |
| VPS Flexible virtual infrastructure with full root access | Workable | Adequate for light remote desktop work — email, documents, a line-of-business application. |
| VDS Virtual server with resources pinned to you alone | Recommended | Guaranteed CPU and memory are what make a remote desktop feel like a local one rather than a slideshow. |
| Dedicated Server An entire physical server, configured to your specification | Recommended | The right tier for CAD, BIM and rendering, where the whole machine is in use for hours at a stretch. |
| Bare Metal Physical compute for sustained, demanding workloads | Recommended | For teams running several workstations on one physical host, with GPUs available on request. |
Architecture, CAD & Engineering Firms workloads you can host
- Remote workstations
- CAD & BIM models
- Rendering
- Project file storage
- Design collaboration
- Plot & print services
Architecture, CAD & Engineering in Edmonton, business by business
These are not the same workload. Sized at the large band, here is what each one actually needs.
| Business | Build | Tier | What decides it |
|---|---|---|---|
| Architecture Firms | 6 vCPU · 96 GB · 4000 GB | Dedicated Server | A remote workstation is only useful if it feels local — this is where pinned resources stop being a nicety. |
| Engineering Design | 20 vCPU · 320 GB · 4000 GB | Bare Metal | FEA runs hold the entire mesh in memory, so RAM decides whether a model solves at all. |
| CAD Services | 6 vCPU · 96 GB · 4000 GB | Dedicated Server | Bureau work means many client files in many formats, and translation is the CPU cost of accepting all of them. |
| 3D Design | 6 vCPU · 96 GB · 4000 GB | Dedicated Server | Rendering is where the hours go, and a GPU changes the working day rather than the benchmark. |
| Product Design | 6 vCPU · 96 GB · 3000 GB | Dedicated Server | Revisions matter more than volume: making the wrong version is a tooling cost, not a reprint. |
| Surveying | 20 vCPU · 320 GB · 4000 GB | Bare Metal | A single scan is a point cloud of hundreds of millions of points, and the client wants it years later. |
| GIS & Mapping | 24 vCPU · 384 GB · 4000 GB | Bare Metal | Spatial queries and tile rendering are both CPU-hungry, and a cached basemap is what makes the map usable. |
| Drone Mapping | 20 vCPU · 320 GB · 4000 GB | Bare Metal | Photogrammetry turns a thousand photographs into one model over many GPU-hours per flight. |
| Graphic Design | 6 vCPU · 96 GB · 4000 GB | Dedicated Server | Layered source files are far larger than anything the client ever sees, and every round is kept. |
| UI/UX Design | 1 vCPU · 6 GB · 3000 GB | VPS | Session recordings from user testing are video, and they accumulate faster than the design files do. |
Where your server runs
All 24 locations cost the same, so pick whichever sits closest to the people who will actually use the server.
Edmonton is closest to Seattle. Every marker costs the same per month.
Show all 24 locations and distances from Edmonton ▾
| Location | Distance | Est. round trip |
|---|---|---|
| Americas · 9 locations | ||
| Seattle, United States | 565 miles | 14–27 ms |
| Santa Clara, United States | 1,190 miles | 29–57 ms |
| Los Angeles, United States | 1,367 miles | 33–66 ms |
| Chicago, United States | 1,434 miles | 35–69 ms |
| Dallas, United States | 1,654 miles | 40–80 ms |
| Toronto, Canada | 1,680 miles | 41–81 ms |
| Atlanta, United States | 1,971 miles | 48–95 ms |
| New York, United States | 2,022 miles | 49–98 ms |
| Miami, United States | 2,568 miles | 62–124 ms |
| Europe, Middle East & Africa · 8 locations | ||
| Stockholm, Sweden | 4,187 miles | 101–202 ms |
| London, United Kingdom | 4,223 miles | 102–204 ms |
| Amsterdam, The Netherlands | 4,305 miles | 104–208 ms |
| Frankfurt, Germany | 4,527 miles | 109–219 ms |
| Madrid, Spain | 4,724 miles | 114–228 ms |
| Milan, Italy | 4,809 miles | 116–232 ms |
| Bucharest, Romania | 5,259 miles | 127–254 ms |
| Tel Aviv, Israel | 6,221 miles | 150–300 ms |
| Asia-Pacific · 7 locations | ||
| Tokyo, Japan | 4,891 miles | 118–236 ms |
| Hong Kong, China | 6,475 miles | 156–313 ms |
| Delhi NCR, India | 6,728 miles | 162–325 ms |
| Kolkata, India | 7,018 miles | 169–339 ms |
| Mumbai, India | 7,405 miles | 179–357 ms |
| Singapore | 8,082 miles | 195–390 ms |
| Sydney, Australia | 8,264 miles | 199–399 ms |
Distances are from Edmonton. Round trips are estimated from fibre distance, not measured — the figure your users see depends on where they are.
Architecture, CAD & Engineering Firms in Edmonton
We work with businesses across Downtown, Old Strathcona, Whyte Ave, Oliver and West Edmonton. Edmonton is an entrepreneurial market where local SEO and fast sites win jobs.
The closest of our 24 data centres to Edmonton is Seattle, about 565 miles away. Round-trip time is set by physical distance more than by anything else, so the nearest site is usually the right one.
Edmonton has a population of about 1,010,899, which is why the large build above is the one most likely to fit a Architecture, CAD & Engineering business here — though the other two are a click away if it does not. Local time is America/Edmonton, so routine maintenance and backups are scheduled against your overnight rather than ours.
Data stays in the jurisdiction you choose, which matters if you are working to PIPEDA. Pricing is quoted in CAD, and the figure is the same wherever the machine physically sits.
Network reach from Edmonton
Estimated from fibre distance rather than measured, and stated as a range. Your own access network decides the rest.
| Data centre | Distance from Edmonton | Estimated round trip |
|---|---|---|
| Seattleamericas | 565 miles | 14–27 ms |
| Santa Claraamericas | 1,190 miles | 29–57 ms |
| Los Angelesamericas | 1,367 miles | 33–66 ms |
Edmonton sits in Alberta, and every one of our 24 locations costs the same — so the only thing worth optimising is which of them your users are closest to. At the large size assumed above, that is roughly 266,667 requests a day crossing that link.
Architecture, CAD & Engineering Firms hosting in Edmonton — FAQs
What size server does a Architecture, CAD & Engineering business in Edmonton, AB need?
Where would the server for my Edmonton, AB business actually run?
Is a VPS enough for Architecture, CAD & Engineering Firms, or do we need a dedicated server?
Can you host remote workstations for us?
Can we start smaller and grow?
Other industries in Edmonton
Same city, different workload.
Architecture, CAD & Engineering Firms hosting nearby
The same workload, in the nearest cities.